Jump to content
GrySql

Nav In-Dash cluster does not work correctly, POI's

Recommended Posts

I will give it a try in the MKT tomorrow when out and about and see if it does the same thing.

Share this post


Link to post
Share on other sites

Well, well, well. Now we have another conundrum. Why do the POI functions work first time, every time for ALL POI categories in our MKZh, but NOT our FFH? I just tested the FFH, and sure enough, it acts just like all of yours. It takes several attempts to bring up Fuel Stations, Restaurants, etc, except Financial, for which it refuses to list POIs! :detective:

Share this post


Link to post
Share on other sites

I going to give you an update if you can call it an update as to POI's and another problem this is happening in my FFH 2013

 

I took my car in yesterday (5-13-2014) with regards to the POI's not working properly and also my Front Sensors going off randomly and even when you turn them off, the car puts them back on and beeps randomly like sitting at a red light or in my subdivision where I live in a circle with just trees. Also Verified with other people having front sensors going off.

The mechanic could not solve the problems and as far as he could determine there are no cluster software updates for POI's so he sent off 2 emails to Ford and their reply (5-14-2014) was "We are aware of the problems but have no solution as of yet".

The poi's bug 181 if you look at one of my links in this section goes back to (9-2013) http://bugs.outofmytouch.com/issues/181

The dealer is willing to do anything to fix these problems, but needs guidance from FORD and the service manager suggested that I start a "CASE #" which I have.

This case is being escalated with high priority and is going to Charles Salaman who has many resources in Ford, and I have indicated that we are aware of these problems but don't know how to fix them is "Unacceptable" and the Lemon Law will be applied if it can't be fixed.

Edited by IraF

Share this post


Link to post
Share on other sites

I going to give you an update if you can call it an update as to POI's and another problem this is happening in my FFH 2013

 

I took my car in yesterday (5-13-2014) with regards to the POI's not working properly and also my Front Sensors going off randomly and even when you turn them off, the car puts them back on and beeps randomly like sitting at a red light or in my subdivision where I live in a circle with just trees. Also Verified with other people having front sensors going off.

The mechanic could not solve the problems and as far as he could determine there are no cluster software updates for POI's so he sent off 2 emails to Ford and their reply (5-14-2014) was "We are aware of the problems but have no solution as of yet".

The poi's bug 181 if you look at one of my links in this section goes back to (9-2013) http://bugs.outofmytouch.com/issues/181

The dealer is willing to do anything to fix these problems, but needs guidance from FORD and the service manager suggested that I start a "CASE #" which I have.

This case is being escalated with high priority and is going to Charles Salaman who has many resources in Ford, and I have indicated that we are aware of these problems but don't know how to fix them is "Unacceptable" and the Lemon Law will be applied if it can't be fixed.

That's frustrating, thanks for reporting this.

Share this post


Link to post
Share on other sites

So, the old boiler plate "See your Dealer" answer we often hear doesn't do anything except send messages up the chain of command.

Good job escalating this issue, thanks. Sounds like you have a good Dealer and Service Dept.

Share this post


Link to post
Share on other sites

I have never had a problem with this dealer and they keep up with the technical issues/bulletins and so on, and last year when in this forum the issue came up about how to turn on DRL's they were aware on how activate them and I didn't hear we have to check with Ford or we don't have the resources and if you don't have the resources "Why are you selling cars or doing service work? Just feeble excuses, this dealer just did it "period" and my car was just on the lot and was not a fleet model and in addition I payed NADA, Zilch to have this done.

In fact yesterday the service manager indicated well before I/we became aware of these issues, Ford already knew about them.

The SM also indicated that I might get a survey on how they performed and Ford considers anything less then a 100% is failure and I indicated that with regards to the service i can't complain because they did every thing possible to correct these bugs, but i will indicate that the problems were not resolved not because of the dealership but because of the higher up's in Ford and will rate them in the negative category.

If these problems had "started very recently" then i can understand "We are aware but don't know the fix yet" but these two problems were known for a long time so feeble excuses are just that.

 

http://www.fordescape.org/forum/46873-post2.html 8/5/2013

 

http://www.focusfanatics.com/forum/showthread.php?t=298446 (Watch Video in link) 10/2012

 

http://www.fordescape.org/forum/engine-technical-discussion/2098-2013-ford-escape-sel-constant-sensor-beeping.html 6/2013

Edited by IraF

Share this post


Link to post
Share on other sites

Just finishing up at the dealer for a 10000 mile check. They said I had the nav set to recent instead of current and that's why my right screen POI did not work. I'll be checking that once I get the car back and will update this post,

 

 

Update: it appears the sync tech misunderstand the issue. I showed it to him. His answer "that's strange". It even worked once. And only once. He says he will have to call the tech line for an answer.

 

 

Oh Kim! I had an open case for this. How about pushing the buttons you can push to get this fixed. I'm getting a little tired of traveling 80 miles round trip to get work done that does not fix anything.

Edited by Sleddog

Share this post


Link to post
Share on other sites

Just finishing up at the dealer for a 10000 mile check. They said I had the nav set to recent instead of current and that's why my right screen POI did not work. I'll be checking that once I get the car back and will update this post,

 

 

Update: it appears the sync tech misunderstand the issue. I showed it to him. His answer "that's strange". It even worked once. And only once. He says he will have to call the tech line for an answer.

 

 

Oh Kim! I had an open case for this. How about pushing the buttons you can push to get this fixed. I'm getting a little tired of traveling 80 miles round trip to get work done that does not fix anything.

 

Hey Sleddog,

 

That's what I'm here for! ;) Please send a PM with your updated mileage (I already have your other info)? I'll be happy to take a look at your account tomorrow.

 

Kim

Share this post


Link to post
Share on other sites

Got call from Jean at CS. We discussed my options for dealer support. The dealer I've been going to is 40 miles away. The dealer near were I work is now a certified Ford electrical vehicle service center. My only problem with them is they will leave boot marks all the interior if they need to crawl around to access anything under the dash. But they have got to be better than morons that have been doing my service. So we'll see what happens.

Share this post


Link to post
Share on other sites

Got call from Jean at CS. We discussed my options for dealer support. The dealer I've been going to is 40 miles away. The dealer near were I work is now a certified Ford electrical vehicle service center. My only problem with them is they will leave boot marks all the interior if they need to crawl around to access anything under the dash. But they have got to be better than morons that have been doing my service. So we'll see what happens.

 

I'm glad to hear that you received the call. Send me a PM if anything changes and I'll update the notes of your case.

 

Kim

Share this post


Link to post
Share on other sites

Here's Ford's party line about the right dash screen POI issue. They are aware of the issue when trying to select a nearby POI from the right dash screen. At this time here's no resolution for the issue. The engineering team is working on a fix. According to Jean, the estimated time for this fix is 90 days or more. She asked me to call her back every 30 days to check to see if there has been any progress.

 

Sorry for the disappointing news. But the interface is Microsoft after all. Now that they no longer support XP, maybe they can get moving on this issue. *sigh*

Edited by Sleddog

Share this post


Link to post
Share on other sites

Sleddog - The interface may be Microsoft but it was Ford that released a vehicle without properly testing all subsystems for use by a normal user. Just my two cents worth.

Share this post


Link to post
Share on other sites

Finally I've heard from the Regional Manager with regards to my CASE# about the POI's not working in the right hand screen and Front Aid Sensors going off randomly, both are known problems to Ford and if one has an open CASE# everytime you bring your car in for service they check to see if your particular car has a service bulletin with regards to problems and fixes (not maintenance) such as mentioned above.

In case of my front aid sensors going off the regional manager suggested that I leave my car at the dealership for five days and see if they can recreate the problem with Ford lending me a loaner for 5 days, although there was no guarantee that the problem will recreate itself during that time so I respectfully declined. I guess I will use the bandaid approach for these two problems and hope fixes will come in the near future?

Share this post


Link to post
Share on other sites

At the dealer today I tried to show them how this doesn't work and it actually worked!! Well only once in about ten tries but I was shocked that it actually worked!! On our FFH the right dash screen can select "Home" or "Favorites" without issues, but cannot select "POI Nearby" or "Previous Destinations" successfully. All four options work perfectly all the time in the Focus Electric. I hope Ford fixes this soon.

Share this post


Link to post
Share on other sites

Add me to the list with this problem. I can't even select Home, it just goes back to the beginning.

Share this post


Link to post
Share on other sites

Add me to the list with this problem. I can't even select Home, it just goes back to the beginning.

Hi Barsoom,

 

Log into your account at: www.Support.Ford.com to make sure the latest software has been installed. Did you just notice this issue, or has this been happening since you purchased the vehicle?

 

Kim

Share this post


Link to post
Share on other sites

Kim,

This is a known problem that many of us have had since day one and the latest software update does nothing to correct this issue. If you could put a bug into someone's ear there at Ford and remind them that this problem still exists and would be greatly appreciated if this could be fixed. It does work on the other Ford and Lincoln vehicles but does not work correctly on the Fusion models.

Thanks,

Gary

Share this post


Link to post
Share on other sites

I noticed it early on, but thought nothing of it. I recently started playing with the dashboard screens and was reminded of it. I usually use the MyFordTouch screen.

Share this post


Link to post
Share on other sites

Kim,

This is a known problem that many of us have had since day one and the latest software update does nothing to correct this issue. If you could put a bug into someone's ear there at Ford and remind them that this problem still exists and would be greatly appreciated if this could be fixed. It does work on the other Ford and Lincoln vehicles but does not work correctly on the Fusion models.

Thanks,

Gary

 

Kim,

 

You and I were communicating on this issue back in January, so this one should not be considered a new problem.

 

Thanks.

Share this post


Link to post
Share on other sites

I haven't looked at my dash screen for some time but a few months ago I had the FCIM software update that fixed my A/C button, now when the light is out the A/C is actually off.

Thinking about the FCIM update I just tried the right dash screen's POI functions.

It takes about 4-5 right clicks but eventually I get the local Fuel, Food, etc. data and locations, the last line says to see the MFT screen for more choices and of course they are present on the touch screen.

Before the FCIM update no matter how many tries the POI's would never advance to actual locations.

After the FCIM update it takes several tries but eventually there is data on the screen.

 

Now the problem is to get a Dealer to actually do the FCIM update, Gkinla is having some trouble with that.

Share this post


Link to post
Share on other sites

The POI issue is not just with the Fusion, the Flex and MKT have the same issue. I could keep hitting the button and eventually get some POI with the right screen in all 3 cars, including the Fusion prior to the FCIM update. I so seldom use it though that I forgot about this bug. I do believe its a timing issue, the nav is expecting something and not getting it in time from the dash.

Share this post


Link to post
Share on other sites

Kim,

 

It may be time for you to take notes to keep track of these issues. You and also communicated about this dome time ago. Had it since day one.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...