Jump to content
RxFiller1963

Input Needed - Fusion 2016 Hybrid

Recommended Posts

Stay away from 2013's unless the transmission has been repaired or replaced. Some also had an AC mold problem. 2014s + are OK as are 2010-12s which is a completely different car but in my opinion somewhat better. The 2013+s only get about 4 mpg better economy.

Share this post


Link to post
Share on other sites

Ford has never issued a recall for the transmission problems and I believe they know which cars have the ( bad bearing? ) problem. The transmissions start to have a "grinding" noise that gets worse. The transmission should be silent except for a sometimes barely perceptible "electric whir" at very low speeds just after it begins moving and when stopping. Drivers shopping for a used car are not equipped to discern this. Probably not all 2013's are susceptible to this problem and the way they are driven may be a factor. There's no way to tell. Ford is waiting out the hybrid warranty on this issue. These transmissions should be and were bulletproof with very low failure rates before and after the first Ford in-house built 2013 transmissions.

A Japanese company, Aisin, ( the "Borg Warner" of Japan ) built all the Ford hybrid transmissions up til 2013. Ford brought the manufacture in house in the 2013 model onward.

In my opinion, in 50 years if you went to a junk yard to see the unrecognizable rusted remains of a FFH, you could salvage the transmission and the unaffected ones would work perfectly. Taxi companies using Ford Escape hybrids have taken these types of transmissions apart at over 300, 000 miles and found little wear at all.

Some also had a transmission case seam oil leakage problem, a rarity in any car today. All these problems required transmission removal, disassembly or replacement, a high labor cost process.

Edited by lolder

Share this post


Link to post
Share on other sites

It's a fact Ford hasn't issued any recall because it's not yet a safety issue. If the problem is a bad bearing as at least one owner was told, Ford should know what transmissions the bad parts went into. If they don't that's poor manufacturing accountability. These are my beliefs and opinions bolstered by over seven years participation in several hybrid forums. I think all the used FFHs are good buys except the early ones with the unresolved transmission and AC mold problems which appear to be mostly 2013s. If not all of then are faulty, we have know way of knowing which ones are good. I'ts a fact that the problems with the transmission occurred after Ford brought the manufacture in house. It's a fact the transmissions shouldn't have any "grinding" noise. It's a fact that pre and post 2013 transmissions have very low failure rates. It's a fact early high mileage transmissions have been inspected and found pristine. I've seen the taxi company YouTube videos. It's a fact that oil leaks are rare today. This is all very sad for Ford. They overstated the mpg starting with the 2013s and had to scramble with software that upped the max EV speed and didn't improve the mpg. The Energi's and C-max's that already had these higher EV speeds have an extra cooling circulation pump. They had to restate the mpg and give rebates to the owners. They are the only company that strangely didn't get hit with a massive fine for this. Whole dashboards had to be removed to put in redesigned AC plenums. If a 2013 with a repaired or replaced transmission and with the newer plenum is for sale, it's a good buy like all the others. If not, I wouldn't touch it with a ten foot pole.

Share this post


Link to post
Share on other sites

I'm not emotional but I am upset with Ford. I know they have been having transmission trouble with other cars. This type of hybrid transmission shouldn't have any failures and in fact other than the 2013s I don't know of any. I think we've had this discussion before. We disagree. You shouldn't have to pay for a new transmission even after 8/100,000 y/m. when it was caused by a manufacturing defect like this. They are not failing from wear and tear. I recommend all the other Ford hybrids. My FFH is the best car I've ever owned. I'm annoyed that they screwed up the first year of gen 2.

 

There is hardly anything to wear in these eCVT transmissions. There are only gears turning on gears, brushless motor/generators all on roller or ball bearings. These things should last 1,000,000 miles. The Toyota eCVTs and all the other Ford eCVTs are bulletproof. How do you screw up a bearing and a case seal today? It was probably a vendor but that's no excuse.

Edited by lolder

Share this post


Link to post
Share on other sites

Good for him ! When Ford brought the manufacture of the excellent Aisin transmission in-house, they claimed they improved it. From a brief video view it looks identical. Bearings and case seal problems are not improvements. This was a mature, reliable device. The point is Ford has not been transparent about the problem. Damning with faint praise I'll agree hardly any auto manufacturers are open with their problems until they are forced to with recalls or publicity. If Ford knew what cars can have the problem they should have recalled them with a customer satisfaction repair as they did with the gen 1 brake software. If they don't, they should double the warranty on the cars that may have the problem.

Share this post


Link to post
Share on other sites

To my knowledge, the 2013 FFH model year. It's a completely different car from the previous 2010-12s.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...