Jump to content
Griswald

Efficiency on longer highway trips...

Recommended Posts

I max out the charge since accelerating back up to 60 uses up some of that extra charge, so it doesn't use any ICE energy to put back into the battery. I am getting better than 47 this way in the mornings. sadly can't do it coming home due to traffic being denser with more idiots on the road. Also the lights are against us going home where in the morning we can usually breeze through 90% of them.

Share this post


Link to post
Share on other sites

It's a balancing act with the right foot. Just enough pressure to keep it on ICE, and not enough to accelerate, but enough to maintain speed on ICE and charge, at times I have been getting it in equilibrium status where there are no arrows on the battery. Thats the hardest part. My wife can't do it either, she had the car since Friday and only got 42 MPG in it, while this morning I got 48.5.

Share this post


Link to post
Share on other sites

I fust completed a 400 mile road trip, averaging 34 mpg at 80 mph and 38 mpg at 75 mph. Avg ambient temp was 95+ degrees. As a comparison my previous Passat TDI would avg 38-39 on the same trip under those conditions. Accounting for diesel fuel 10% per gallon greater energy density the Atkins cycle Fusion is on par in thermal efficiency.

 

I am very pleased considering only 2k on the FFH drivetrain.

Edited by darrelld

Share this post


Link to post
Share on other sites

I fust completed a 400 mile road trip, averaging 34 mpg at 80 mph and 38 mpg at 75 mph. Avg ambient temp was 95+ degrees. As a comparison my previous Passat TDI would avg 38-39 on the same trip under those conditions. Accounting for diesel fuel 10% per gallon greater energy density the Atkins cycle Fusion is on par in thermal efficiency.

 

I am very pleased considering only 2k on the FFH drivetrain.

That's the marvel of the Atkinson. It's going to move the same weight down the road with the same fuel BTU efficiency as a good diesel. It's similar in some ways; it runs with little intake manifold throttling and is pretty lean most of the time. Those were always a source of loses in gas engines in the past.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...