clummus Report post Posted June 7, 2013 Ok, I can't find a way to add pictures from my phone to the post. when u turn on cruise control , sometimes there are green lines ( dashes really) that show up on both sides of the car icon. now I just noticed this happening yesterday. then the lines fade to grey at times. then later they weren't there at all. does this have something to do with the lane keeping alert? it was around the time I noticed them that the driver alert feature shows unavailable in the menu screen. called my service department but have not gotten a response yet. Quote Share this post Link to post Share on other sites
kuzzi Report post Posted June 7, 2013 RTM, Look in your manual,Go to Instrument Cluster Section,Go to Warning Lamps and Indicators,Look for Lane Keeping Aid. Is that the icon? Quote Share this post Link to post Share on other sites
clummus Report post Posted June 7, 2013 Yes. but it should be on or activated at all times I thought. we set all these to "on" at the dealer. Quote Share this post Link to post Share on other sites
kuzzi Report post Posted June 7, 2013 I do not have that feature, so I can only point you to the manual again. Go to Driving Aids,Lane Keeping System, Read through that and hopefully it will help. Quote Share this post Link to post Share on other sites
jeff_h Report post Posted June 7, 2013 You might have it set to be activated, and if so maybe it gives the green lines on the display to indicate that the forward-looking camera can 'see' lines on the road and thus able to keep you in the boundaries, but if you are a road without sufficient markings the lines to gray to indicate that it can't 'see' any guidelines with which to keep you in place? So compare the display to the lines available on the road at the time, and see if there is a correlation. Quote Share this post Link to post Share on other sites
murphy Report post Posted June 7, 2013 Lane keeping must be turned on every time you start the car. Push the button on the end of the turn signal stalk.It only works at 40 mph or above.Below 40 mph the lines are gray.Above 40 mph the lines are green if you are in your lane.If you stray toward either side of the lane the line on that side will turn yellow.If active lane keeping is enabled and you keep drifting the car will nudge the steering wheel to bring the car back into the lane.I don't know what happens if active lane keeping is disabled since I've never tried it.I guess I should experiment. I've found so many errors in the manual that I no longer trust it. It's obviously a cut and paste job from a different car that no one bothered to proof read.Read the description of the zoom mode for the rear camera. It doesn't work anything like the description in the manual. Quote Share this post Link to post Share on other sites
clummus Report post Posted June 7, 2013 Thank you Murphy. I don't like reading.the manual and getting wrong info. I feel that this forum is here to help others. and I appreciate your input. I had no idea I had to enable it each time. Thank u:) Quote Share this post Link to post Share on other sites
Guardian_Bob Report post Posted June 7, 2013 Lane keeping must be turned on every time you start the car. Push the button on the end of the turn signal stalk.It only works at 40 mph or above.Below 40 mph the lines are gray.Above 40 mph the lines are green if you are in your lane.If you stray toward either side of the lane the line on that side will turn yellow.If active lane keeping is enabled and you keep drifting the car will nudge the steering wheel to bring the car back into the lane.I don't know what happens if active lane keeping is disabled since I've never tried it.I guess I should experiment. I've found so many errors in the manual that I no longer trust it. It's obviously a cut and paste job from a different car that no one bothered to proof read.Read the description of the zoom mode for the rear camera. It doesn't work anything like the description in the manual. Sort of. You can create a MyKey that by default will have lane keeping on. If you have an admin key you'll have to turn the lane keeping system on each time. The lane keeping can be set to three different modes. One is just an alert (shakes the wheel like a rumble strip). One tries to nudge you back in your lane (aid). The third nudges you back and shakes the wheel. Lane keeping is off while the turn signal is on. And it will work at speeds way below 40. I've had it work down to 25 at least. http://www.motorcraftservice.com/vdirsnet/OwnerGuide_EU/MainContent_Test_Layout.aspx?year=&model=Fusion%20Hybrid&bookcode=O21825&market=US&language=EN&chapterUid=G1518978&subUid=G1549384&topicHref=G1549385 Quote Share this post Link to post Share on other sites
clummus Report post Posted June 7, 2013 can I ask how to set the Mykey? forgive me for not looking it up..packing for the weekend:)..Thank you guardian bob Quote Share this post Link to post Share on other sites
jsolan Report post Posted June 7, 2013 Lane keeping must be turned on every time you start the car. Push the button on the end of the turn signal stalk.It only works at 40 mph or above.Below 40 mph the lines are gray.Above 40 mph the lines are green if you are in your lane.If you stray toward either side of the lane the line on that side will turn yellow.If active lane keeping is enabled and you keep drifting the car will nudge the steering wheel to bring the car back into the lane.I don't know what happens if active lane keeping is disabled since I've never tried it.I guess I should experiment. I've found so many errors in the manual that I no longer trust it. It's obviously a cut and paste job from a different car that no one bothered to proof read.Read the description of the zoom mode for the rear camera. It doesn't work anything like the description in the manual. Also, I've found lines are gray above 40 mph if the system cannot "find" the boundaries. I'm not 100% how it works, but it seems like it may use cameras to try and detect painted lines. If the lines on the road are tarred over or simply missing, the green line on that side of the road does not show up on the dash for me. Quote Share this post Link to post Share on other sites
Guardian_Bob Report post Posted June 7, 2013 can I ask how to set the Mykey? forgive me for not looking it up..packing for the weekend:)..Thank you guardian bob Page 49: http://www.motorcraftservice.com/pubs/content/~WODFHY/~MUS~LEN/42/13fhyom1e.pdf There is a lot of things going on with MyKey. You may not like the implications, so make sure you understand what you can and cannot change. Quote Share this post Link to post Share on other sites
clummus Report post Posted June 7, 2013 it says that document is not a valid pdf and won't let me open it...I'll read the manual lol Quote Share this post Link to post Share on other sites
neod192 Report post Posted June 11, 2013 it says that document is not a valid pdf and won't let me open it...I'll read the manual lolThat doc was the manual :) owner.ford.com also has a html version of the manual. The MyKey section is pretty complex, so definitely take the time to read and understand it. Quote Share this post Link to post Share on other sites
fusionTX Report post Posted June 11, 2013 And it will work at speeds way below 40. My manual says it will work at 40 MPH or above (p. 204) , and that is what I have experienced. Quote Share this post Link to post Share on other sites
JSKershaw Report post Posted June 12, 2013 I have the Lane Assist feature and it does only work when going about 40mph. The camera that looks for the lines are behind the rear view mirror. When it cannot see the lines (or when lines are not present on the road) the lines on the dash will be gray. Once the camera spots the lines it will turn green. One thing I noticed is that my car doesn't "shake" or simulate a rumble strip. I have it set to Aid and Alert. I think the Alert just pops up a message on your left screen and will display a coffee cup. I have not experienced a shaking wheel just the nudge back into the lane. Quote Share this post Link to post Share on other sites
neod192 Report post Posted June 12, 2013 One thing I noticed is that my car doesn't "shake" or simulate a rumble strip. I have it set to Aid and Alert. I think the Alert just pops up a message on your left screen and will display a coffee cup. I have not experienced a shaking wheel just the nudge back into the lane.That doesn't sound right. Mine shakes if the Alert feature is on - there's no alert on the left screen for lane assist. The alert to stop and drink some coffee is from the Driver Assist. Mine also turns off the lane assist if I tap the T/S level, I don't have to push it all the way to the continuous blinking mode. It turns off after 2 blinks, not right away. Quote Share this post Link to post Share on other sites
Waldo Report post Posted June 12, 2013 The idea is that it will nudge first, then shake later. It's all relative to the distance you are over the line. If you have "Aid" on, it won't set the "Alert" until you are well over the line. If you have "Aid" off and "Alert" on, it will vibrate much sooner after crossing the line. Unless you are really trying, or you're in a fairly sharp curve, it's hard to get the "Alert" when you have the "Aid" on, because usually the "Aid" will straighten you out before you get far enough for the "Alert" to trigger. It will not turn on until you hit 40mph, but it will stay on until you drop down below 35mph. It should never be working at 25mph. 1 mokee reacted to this Quote Share this post Link to post Share on other sites
JSKershaw Report post Posted June 14, 2013 Thanks, I will give this a try when there's not too many cars on the road and see if it works. I will report my findings. Quote Share this post Link to post Share on other sites
