yky Report post Posted February 5, 2013 So, I was wondering ... has anybody compiled a list of "undocumented features" for the Ford Fusion Hybrid models? For example: *Air circulation - force stay on Hold the "air circulation" button for five seconds when turning on to force it to circulate air until the car is shut off *Regenerative braking - force use of regenerative braking only (no friction brakes) To force the vehicle to only use regenerative brakes, push the accelerator pedal and the brake pedal simultaneously If anybody has seen lists like the ones above, please reply and share. On the other hand, if you know of an "undocumented feature" and have not seen it posted anywhere, please reply as well and let the rest of us know. Quote Share this post Link to post Share on other sites
jonesm8 Report post Posted February 5, 2013 When do you press the break and accelerator at the same time? I assume before putting in gear for a drive? And is it something that must be done every restart of the vehicle? Quote Share this post Link to post Share on other sites
B25Nut Report post Posted February 6, 2013 If you were to force regenerative braking, you would be pretty much guaranteed to rear end someone within a week. This would be a bad (stupid) idea. For constant air circulation, just turn the fan on without the system being in Auto. Quote Share this post Link to post Share on other sites
acdii Report post Posted February 6, 2013 47 really means 35? Oh wait, that has been documented here, many many times. 1 Fastronaut reacted to this Quote Share this post Link to post Share on other sites
DeeCee Report post Posted February 6, 2013 If you were to force regenerative braking, you would be pretty much guaranteed to rear end someone within a week. This would be a bad (stupid) idea. For constant air circulation, just turn the fan on without the system being in Auto.Agree. Why in the world would you only want regenerative braking. If this is possible sounds like a lawsuit in the making. "I stepped on the brake but could not stop." Quote Share this post Link to post Share on other sites
lolder Report post Posted February 6, 2013 (edited) In an eCVT hybrid, if you step on the brake while pressing the accelerator in "D", the ICE will die. I doubt you can ever force "only" regen. Edited February 6, 2013 by lolder Quote Share this post Link to post Share on other sites
coach81 Report post Posted February 6, 2013 force regen braking only :hysterical: 1 Fastronaut reacted to this Quote Share this post Link to post Share on other sites
yky Report post Posted February 8, 2013 (edited) Quote: force regen braking only :hysterical: Okay, so that undocumented feature I've read about "somewhere on the Internet" does not exist. Yes, it probably is a bad idea, but that's not the point of this thread. ;) Does anybody know of any additional "undocumented features"? Edited February 8, 2013 by yky Quote Share this post Link to post Share on other sites
GrySql Report post Posted February 8, 2013 After driving more than 3 hours in the car I start feeling romantic.... :wub: 2 elle and B25Nut reacted to this Quote Share this post Link to post Share on other sites
acdii Report post Posted February 8, 2013 I dont think thats the car, probably those little blue pills had something to do with that! :yahoo: Quote Share this post Link to post Share on other sites
shaggy314 Report post Posted February 8, 2013 After driving more than 3 hours in the car I start feeling romantic.... :wub: I was going to say the seat heater is on low and the indicator is broken... Quote Share this post Link to post Share on other sites
acdii Report post Posted February 8, 2013 However, were he driving my old F350, which gave a good massage at times, I could fully understand! :) IYKWIM Quote Share this post Link to post Share on other sites
gemdc Report post Posted February 18, 2013 As acdii mentioned somewhere, when you hold the left side OK button down then turn the switch to Run mode, the display jumps into a "technician" mode. Displays a bunch of stuff as you scroll down or up with the arrows. One thing is the engine temperature (coolant) in centigrade. Mine was 87 degrees after a stop when I tried it (188 F). I would be very careful with this feature as it appears you may be able to change settings that would not wish to be changed. This mode goes off when you turn the switch off and then restart. If anyone knows how to translate all these undocumented settings maybe it would be harmless but I won't be trying any changes. Quote Share this post Link to post Share on other sites
acdii Report post Posted February 18, 2013 Its a diagnostic screen, so no worries, nothing can be changed using it. In the F150 there was one mode that would flash the center screen in a psychedelic fashion. Was fun to watch, and hypnotic too. Quote Share this post Link to post Share on other sites
wazzul Report post Posted February 25, 2013 Here's another rarely heard of or thought of feature in the 2013 Fusion. Pull-Drift Compensation is another element here in the 2013 model, it working with your electric power-assisted steering in the vehicle to avoid the negative effects of steeply crowned roads as well as steady crosswinds. This system is able to change the direction of the car if it senses the car drifting off the road, and uses EPAS to provide gradual steering corrections to make sure the car is going the direction the driver wants. Quote Share this post Link to post Share on other sites
DeadButDreaming Report post Posted August 1, 2013 As acdii mentioned somewhere, when you hold the left side OK button down then turn the switch to Run mode, the display jumps into a "technician" mode. Displays a bunch of stuff as you scroll down or up with the arrows. One thing is the engine temperature (coolant) in centigrade. Mine was 87 degrees after a stop when I tried it (188 F). I would be very careful with this feature as it appears you may be able to change settings that would not wish to be changed. This mode goes off when you turn the switch off and then restart. If anyone knows how to translate all these undocumented settings maybe it would be harmless but I won't be trying any changes.can I do this also on the 2012 FFH??or is it a different procedure?? plz let me know the how to!! :) Quote Share this post Link to post Share on other sites
Barsoom Report post Posted August 1, 2013 I read on the internets that if you get the car up to 88 mph in EV+ mode and then press the left and right OK buttons, you will go back in time based on the song that's playing on the Sirius radio station in the MFT display. 5 kuzzi, FusionRose, djminfll and 2 others reacted to this Quote Share this post Link to post Share on other sites
DeadButDreaming Report post Posted August 1, 2013 what is EV+ mode is different than EV mode..what I know is that on EV you go up to 47mph only. Quote Share this post Link to post Share on other sites
Ric Report post Posted August 1, 2013 I really like the cruise feature: I can start out, turn cruise on, set to the desired speed and let it go. Takes you to the speed you selected. Quote Share this post Link to post Share on other sites
aaronj1159 Report post Posted August 1, 2013 I really like the cruise feature: I can start out, turn cruise on, set to the desired speed and let it go. Takes you to the speed you selected. Yeah, I use this sometimes too. Helps me accelerate nice and smoothly without much effort. Quote Share this post Link to post Share on other sites
djminfll Report post Posted August 1, 2013 (edited) what is EV+ mode is different than EV mode..what I know is that on EV you go up to 47mph only. EV+ mode "learns" the driver's frequent destinations in order to boost fuel efficiency. Using GPS data from Ford Sync, the computerized feature automatically adjusts powertrain controls based on location to deliver more electric-only driving. Edited August 1, 2013 by djminfll 1 corncobs reacted to this Quote Share this post Link to post Share on other sites
DeadButDreaming Report post Posted August 1, 2013 oh I suppose that's a feature on 2013 and up not on my 2012 FFH!! Quote Share this post Link to post Share on other sites
KLH Report post Posted November 5, 2013 Here's an undocumented "feature", the AC compressor can turn on and off while the HVAC mode is on Automatic. To disable this so that the AC isn't turned on automatically, choose a vent direction. This is on 2013s, I'm not sure about 2014s... Quote Share this post Link to post Share on other sites
