pippin65 Report post Posted July 24, 2010 was wondering if anyone has done their own oil change and could provide us with a do it yourself guide with pictures. or at least observations of how easy or hard it was. I guess there's some type of air cheating panel underneath the car. where's the jacking point for a floor jack, oil filter used/number, etc. thanks. Quote Share this post Link to post Share on other sites
dogo88 Report post Posted July 24, 2010 Here's what I saved from awhile ago: "If you have always done your own oil changes, the FFH is no different except for removing a couple access panels on the bottom of the engine. There are 2 access panels on the bottom, one is marked "oil filter access" and the other "drain plug access" or something along those lines, and you'll need a couple small sockets to remove those. Other than that, you need a 13mm socket for the drain plug, and a FL 910 Motorcraft filter. Once done, you need 5 qts oil, I use 5W-20 synthetic and you will also find plenty of posts here about which type that other owners prefer. If you don't mind taking 30 minutes of your time to change the oil, you will find no surprises on the FFH over other cars you've had." Jacking instructions are in the trunk with the spare and in the manual. I let my dealer do the oil change and rotate the tires for the special they have every quarter for $29.99. Dan Quote Share this post Link to post Share on other sites
pippin65 Report post Posted July 24, 2010 (edited) thanks, dan. are the access panel fasteners plastic? Edited July 24, 2010 by pippin65 Quote Share this post Link to post Share on other sites
dogo88 Report post Posted July 24, 2010 thanks, dan. are the access panel fasteners plastic? No, hex head screws. Panels are clearly marked. The words are extruded onto the plastic cover. Very obvious when you get under there. Dan Quote Share this post Link to post Share on other sites
jeff_h Report post Posted July 24, 2010 http://www.fordfusionforum.com/index.php?/topic/3818-oil-change-equipment-for-hybrid/ Quote Share this post Link to post Share on other sites
pippin65 Report post Posted July 27, 2010 jacking point for a floor jack??? Quote Share this post Link to post Share on other sites
akirby Report post Posted July 27, 2010 jacking point for a floor jack??? Owner's manual - same place as the OEM jack. But you'll want to pick up an adapter to let it fit over the seam. Quote Share this post Link to post Share on other sites
pippin65 Report post Posted August 11, 2010 was really easy to change the oil. used ramps...took 15 minutes...still loving my ffh Quote Share this post Link to post Share on other sites
Buster1 Report post Posted August 12, 2010 Is it exactly 5 quarts, or is it a little bit less or more? Truely, how much do you put in? Quote Share this post Link to post Share on other sites
Noel Report post Posted August 28, 2010 (edited) Is it exactly 5 quarts, or is it a little bit less or more? Truely, how much do you put in? Be careful here. DO NOT, overfill the oil. The dealer did this to me twice, by following what the service manager was a directive from Ford to put in x amount of oil and NOT test the oil on the dip, presumably to save time, and the net result with it was overfilled about a 1/4 quart maybe. This translated to a near disaster for me a month or so ago: I was just starting a pass around a long truck that was making a right hand turn at an intersection. I could see the oncoming lane was plenty clear, and we were only going 10 mph around the turn, so I stepped on it to pass him and the engine flooded with oil, causing immediate loss of power, a huge cloud of smoke, and the service engine light to appear. Fortunately I was able to get back in in front of him before oncoming traffic approached. I now fill only to 3/4 of the way to the top of the dip stick full line to make sure this never happens again. It does not appear to have caused any permanent harm to the engine. Noel Edited August 28, 2010 by Noel Quote Share this post Link to post Share on other sites
rfruth Report post Posted August 28, 2010 I find it hard to believe (but don't know for sure) that 1/4 quart would make that big of a difference, wonder how accurate the dip sticks are ? Quote Share this post Link to post Share on other sites
Buster1 Report post Posted August 28, 2010 Dipsticks are highly accurate. What is NOT accurate is people who measure with a very cold car, on a slope or hill, or right after the engine has been shut off...all will yield innacurate readings. Quote Share this post Link to post Share on other sites
FFHdriver Report post Posted August 28, 2010 I find it hard to believe (but don't know for sure) that 1/4 quart would make that big of a difference, wonder how accurate the dip sticks are ?I too find it hard to believe an extra 1/2 pint of oil would cause any trouble. If the engine "flooded with oil" it should have hydrolocked and destroyed itself. Quote Share this post Link to post Share on other sites
lolder Report post Posted August 29, 2010 I too find it hard to believe an extra 1/2 pint of oil would cause any trouble. If the engine "flooded with oil" it should have hydrolocked and destroyed itself.If it has crankcase ventilation into the intake manifold, crankshaft counterbalances hitting a high oil level would create a maelstrom of vapor that would cause the smoke. Quote Share this post Link to post Share on other sites