firebuff312 Report post Posted May 4, 2010 Hey everybody...I have a 2010 fusion se w/ 6 speaker audio and an aftermarket sub installed. I noticed that in between the cutouts for the 6x9's in the rear deck there is a 4 inch hole. My sub dosent sound too great with the seats closed up, so I figured I would put a port in this cut out to allow some extra sound to come into the passenger compartment. There is a layer of insulation, a piece of thin plywood, then carpeting on top. My question is what would be the eiasiest way to cut through these materials without destroying anything>>>??? Thanks in advance... Quote Share this post Link to post Share on other sites
danager Report post Posted May 4, 2010 (edited) That layer of plywood is hardboard - the same stuff most wooden clipboards are made of. It is lightweight and rigid... I have always used a utility knife to cut through those materials. Scoring the wood and removing a bit at a time. Be careful not to stretch the carpeting on the top, or it will always be noticeable where you cut. That area will also be more prone to dust as you are now encouraging air flow. Edited May 13, 2010 by danager Quote Share this post Link to post Share on other sites
firebuff312 Report post Posted May 10, 2010 Thank you for that. By the way Im unsure about that last part. Im very familiar with car audio and I know if you have subs in ported/bandpass boxes they sound better with some sort of place to allow air movement between between the cabin and the trunk. That makes the difference between bass you can hear and bass you can feel. Quote Share this post Link to post Share on other sites
Sithil Report post Posted May 11, 2010 (edited) Well since this is how you want it: with 10+ years of wood working and carpentry experience I'd say cut a + in the fabric to fold under once the hole is cut and a basic hole saw to cut through the hardboard material if you want a perfect circle, or use a jig saw with a hardboard blade. Then once you done take a hammer to your head for wasting your time with this and messing up the look and value of your vehicle. Edited May 13, 2010 by Sithil Quote Share this post Link to post Share on other sites
danager Report post Posted May 11, 2010 (edited) . Edited May 13, 2010 by danager Quote Share this post Link to post Share on other sites
firebuff312 Report post Posted May 12, 2010 "You can face the woofers in any direction or place them anywhere in the vehicle and the gain will be the same because it is only dependent on vehicle size. This is not to say that firing orientation or woofer placement will not have an effect on the subwoofer system output. It certainly does but this difference is not attributable to the cabin gain. CABIN GAIN DEPENDS ON THE SIZE OF THE VEHICLE ONLY! I just wanted information on how to cut through the rear deck, not "information" that you think is correct but is not. I'am not building a bandpass box, nor do I need information on how to construct an audio system. Thank you for the attempted advice but It dosent sound like either of you know what heir talking about. Quote Share this post Link to post Share on other sites
danager Report post Posted May 13, 2010 Fixed it for you. No need to use CAPS and "quotes", we can all get along. Quote Share this post Link to post Share on other sites
firebuff312 Report post Posted May 14, 2010 Its not a Porche, I'm not worried about the "value" of the vehicle. I'm worried about some knockin bass. THANK YOU FOR TELLING ME HOW TO DO THAT THOUGH SITHIL. Quote Share this post Link to post Share on other sites
Sithil Report post Posted May 14, 2010 THANK YOU FOR TELLING ME HOW TO DO THAT THOUGH SITHIL.Glad I could be of service. Nice use of the caps lock btw *snicker* :spiteful: Quote Share this post Link to post Share on other sites
timithy.forman Report post Posted May 25, 2010 Glad I could be of service. Nice use of the caps lock btw *snicker* :spiteful: you want big thumping bass, just get a bigger setup and dynamat the outer lyings of the trunk, so the sound is pushed back through. There is so much empty space in a trunk, IE inside the paneling, it disspates out. so redirect the sound in your car. Quote Share this post Link to post Share on other sites