Jump to content
George Cole

2010 Fusion Hybrid front plate holder

Recommended Posts

I'm new here and just took delivery of my new FFH. I want to remove that damn butt ugly front license plate holder. I know that I have to fill/plug the holes but is there a plug available to make this happen?

 

Thanks,

George Cole

Fayetteville, Georgia

Share this post


Link to post
Share on other sites
I'm new here and just took delivery of my new FFH. I want to remove that damn butt ugly front license plate holder. I know that I have to fill/plug the holes but is there a plug available to make this happen?

 

Thanks,

George Cole

Fayetteville, Georgia

 

Ditto.

 

I don't even have my FFH yet and am also looking for a way to plug the front. I asked my dealer when I ordered it built to not include the front bracket but he said since I am purchasing it in TX it has to be put on the order, even though it will be registered to FL where a front plate is not req.

Share this post


Link to post
Share on other sites

Geez.... I custom ordered my car so I'd not have this issue at all. PA does not require

front license plates. And here is the bad part... Ford dealer does not have these

color matched plugs - they used to do it, but not any more. Acura does it as the holes

are pre-drilled and they sell the color matched plugs for $5 and it looks good and they

are flush.

 

Now I know that the FFH does not come from the factory with the holes in it. The

dealer drills them in, and as I walked the lot, there are plenty of cars with the dealers

"promo" tag on the front - mostly all the lower end cars and lower end Fusions, not

the more expensive ones (go figure).

 

I clearly have on my sales order "No Front License Plate, No Decals" - and it was

left out of my order. Otherwise it comes in the trunk and when they prepare the

car, they drill away unless you can prevent it.

Share this post


Link to post
Share on other sites
Geez.... I custom ordered my car so I'd not have this issue at all. PA does not require

front license plates. And here is the bad part... Ford dealer does not have these

color matched plugs - they used to do it, but not any more. Acura does it as the holes

are pre-drilled and they sell the color matched plugs for $5 and it looks good and they

are flush.

 

Now I know that the FFH does not come from the factory with the holes in it. The

dealer drills them in, and as I walked the lot, there are plenty of cars with the dealers

"promo" tag on the front - mostly all the lower end cars and lower end Fusions, not

the more expensive ones (go figure).

 

I clearly have on my sales order "No Front License Plate, No Decals" - and it was

left out of my order. Otherwise it comes in the trunk and when they prepare the

car, they drill away unless you can prevent it.

Share this post


Link to post
Share on other sites

Well here is a case of some flunky salesman pissing on your foot and trying to tell you it's raining outside....I was told that the hybrids come from the factory with the plate bracket installed....I know mine was built in Mexico with the transmission from Japan...This is helping the American auto workers????? go figure....getting back to my original problem..I did procure two jumungus pop rivets to fit into the holes but I have to paint them...pop in plugs would be so much better......The up side is that I unloaded a 1995 740iL BMW that was a hole for throwing money into and did get $5400.00 for it....imagin a $76,000.00 car depreciating that much.....Good thing is I didn't buy it new....

 

Thanks for the info...

 

George Cole

Fayetteville, Georgia

Share this post


Link to post
Share on other sites
Well here is a case of some flunky salesman pissing on your foot and trying to tell you it's raining outside....I was told that the hybrids come from the factory with the plate bracket installed....

 

They could be in some cases, I am not 100% sure that all come without it.

But I know mine is new and has no holes and no bracket

in the trunk for the monkeys to screw into it. Some fusions on the lot have a front tag, some do not.

But I would think Georgia would get them without and a bracket in the trunk - unless they delete it

from the order - which I waited 2 months for!

 

http://www.worldlicenceplates.com/usa/US_XLPR.html

 

Now if you'll excuse me, I am about to go pick up my new car and hopefully it will not have a

front tag on like when I saw it off the truck a few days ago. I will ask to see it before I turn over

my check.

 

I am trading my Jap car made in Ohio for US company's car made in Mexico... like anything makes

sense any more. :finger:

Share this post


Link to post
Share on other sites
They could be in some cases, I am not 100% sure that all come without it.

But I know mine is new and has no holes and no bracket

in the trunk for the monkeys to screw into it. Some fusions on the lot have a front tag, some do not.

But I would think Georgia would get them without and a bracket in the trunk - unless they delete it

from the order - which I waited 2 months for!

 

http://www.worldlicenceplates.com/usa/US_XLPR.html

 

Now if you'll excuse me, I am about to go pick up my new car and hopefully it will not have a

front tag on like when I saw it off the truck a few days ago. I will ask to see it before I turn over

my check.

 

I am trading my Jap car made in Ohio for US company's car made in Mexico... like anything makes

sense any more. :finger:

 

I didn't know that the front bracket had to be drilled into the front fender when I ordered it. Eight weeks later I got the car and found the front bracket in the trunk and nothing drilled. Boy I was lucky!

Share this post


Link to post
Share on other sites

When I ordered my FFH I pacifically stated that I did not want the front license bracket mounted (WA is a front license state). Everytime I talked with the fleet manager (he's the one I dealt with), I reminded him that I did not want the front license bracket mounted. Just before the car arrived, I reminded him one more time.

 

When the car arrived (but before prep) I took a look at it and reminded the prep people to just leave the front license bracket in the trunk. That is where it still is! Don't want holes on the front to fill but have the bracket in case I am forced to put it on.

Share this post


Link to post
Share on other sites
I didn't know that the front bracket had to be drilled into the front fender when I ordered it. Eight weeks later I got the car and found the front bracket in the trunk and nothing drilled. Boy I was lucky!

 

Picked mine up tonight and sales guy told me that when they come on the truck, some have the plate drilled

and some do not - with no logical pattern. That was the first thing he said that I actually

believe.

 

No bracket for me, but he confessed he had to stop prep guys from putting a decal on it

just as he had it peeled and was attaching it!

Share this post


Link to post
Share on other sites

When I bought mine I told them not to mount it and the sales guy wrote a note and put it in with the floor mats and also hid the bracket. I was surprised that they actually followed my instructions. Would have been annoyed if they mounted it. Hope I don't get a ticket. Just got my windows tinted and the tint guy said 90% of the people who get busted for too dark of tint have no front license plate.

Share this post


Link to post
Share on other sites
Picked mine up tonight and sales guy told me that when they come on the truck, some have the plate drilled

and some do not - with no logical pattern. That was the first thing he said that I actually

believe. No bracket for me, but he confessed he had to stop prep guys from putting a decal on it

just as he had it peeled and was attaching it!

 

 

Big day for SMR & the OP ! (don't care if mine comes pre-drilled or not, its gonna get done)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...