Phil3 Report post Posted March 17, 2018 (edited) Hello, The small plastic trim cap that covers the windshield side of the sun visor mount has fallen out (and so has the passenger side), but putting this back in is no big deal. A far bigger issue is that for the driver's side, returning the visor from a deployed position to back against the headliner simply disengages the visor mount from whatever it connects to inside the roof area. This leaves the visor suspended by the right side hinge point only. For the life of me, I do not see what or how the left side visor mount connects to anything inside the roof. I stuck my finger up on the cavity and feel nothing, except the wiring to the visor. Strangely, the right visor, also minus the cap, does NOT come loose upon operation of the visor. From what I can see and determine, the decorative cap that is always falling off does not hold the visor in place. Maybe I am wrong, but the cap has nothing on it that appears to snap into the floating metal clip in the roof. It is maddening, and unbelievable that Ford cannot make a sun visor clip stay affixed to the car! Thanks. Phil Edited March 17, 2018 by Phil3 Quote Share this post Link to post Share on other sites
mwr Report post Posted March 18, 2018 I've never had a problem with that on my 2015 FFH SE. Here are two photos just to make sure I was looking at the same thing you were talking about. Quote Share this post Link to post Share on other sites
Cobra348 Report post Posted March 28, 2018 (edited) Still under warranty? If so, take it in. Explain that if that thing falls off while driving it could cause some hurt (accident?). Rule #1 that most folks forget - if the vehicle is still under warranty, then the manufacturer is obliged to at least scope it out. Edited March 28, 2018 by Cobra348 Quote Share this post Link to post Share on other sites
