20" wheels don't affect the ride quality that much if you get quality tires, I have an 07 Fusion Sel with 20x9.5" Zennetti "five" wheels with 245/35ZR20 Toyo Proxes 4's and i have never had a problem, i had them "road force balanced" when i bought them, the are completly vibration free up to 120mph(no speed limiter(SCTX3)) on the interstate. i've put 27,000 miles on them already. the zenetti's are light enough that they don't affect performance that much

Check with Steeda Autosports (www.steedafusion.com) I Have a 07 Fusion SEL V6 Currently i've got installed a Steeda CAI (w/ new alumnium mass air sensor)Throttle body spacer Custom tune file for my SCT X3 Programmer, Silencer Delete kit, Strut tower brace. All from Steeda Autosports.

I'll save you all some time and money... Blank Fusion keys (w/remote on key"IKT") need to be cut then programmed. READ FIRST>>>>>> You Must NOT touch the brake pedal during programming!(it will exit) ALL actions MUST be done within 20 Seconds of the previos action! Car will exit programming mode if no activity for more than 20 seconds Here is the programming code------>>>>> 1) Make sure you have ALL of the keys to be programmed with you!!!! 2) Unlock your car electronically with the key fob or door lock button 3) Put a key in the ignition (doesn't matter which one) 4) Turn the key from the OFF position to RUN(not Start) position 8 times within 10 seconds with the 8th turn ending in the RUN position. the doors will lock then unlock to confirm programming mode. 5) Within 20 seconds of completing the previous step. press any button on fob 1. the door locks will cycle to confirm the fob 1 has been programmed. 6) Repeat for all keys to be programmed 7) After all keys are programmed turn the key to OFF position. the door lockes will cycle to confirm the car has exited the programming mode. You can program Upto 4 Keys. Keys are around $50 at the dealers Helps when you have family at FoMoCo...

I went with 35% tint, just dark enough to do the trick but light enough the cops won't hound you over the trick to get the tint to stick to the "dots" is to get a heat gun and a stiff paint brush and heat the tint around the dots and tap the stiff paint brush around the dot's, the tint will slightly stretch covering the dots and when it cools the dot's will barely be visible. it took me about 3 times of doing it but it finally worked.

Mustang wheels will fit as long as they are a 5 x 4.5" bolt pattern and are 8.5" wide or less. I just installed a set of 20"x8.5" Zenetti five wheels with 245/35ZR20 Toyo Proxes4