LED DRL Project 05 Wiring into fuse Box

I didn't want to compromise any existing wiring by splicing into wires. Our first plan was to solder to the spare 10 amp fuse labeled as 13/14 in the fuse box under the hood. At first this seemed like it would work good as it lost power when the ignition turned off. It turned out later, after the install was complete that this fuse location didn't lose power when the ignition was turned off unless the HVB was depleted. So I had to come up with a plan "B". Finally decided to attach the LED strips wire to the automatic windshield wiper fuse (#3) as I knew from these forums that the windshield wipers did lose power when the ignition was turned off. To prevent accidentally blowing that fuse at a bad time. We hooked into the power side of the fuse and then wired in a separate 5 amp fuse for the LED strips. Eventually, if I can find one that will work, I'll replace the 5 amp fuse with something smaller (like a 2.5 amp fuse).