pics of audi style led lights

[junior.29.dh]

Just installed these last night. Not to hard had to splice into stock wire harness for parking lights. LEDs are on a 3m strip totally sealed. I like em, your thoughts.

[djminfll]

I really like those, I have wanted to do that to my car, but I don't know where to get it done. And I'm pretty sure it's not something I can do myself! Thanks for posting the pix!

[hybridbear]

Nice!

[expresspotato]

Meh looks cheaply done

[junior.29.dh]

U r right it was cheaply done. I paid forty dollars for the leds and did the work myself. I spliced the wires where needed, hid the wires in loom and mounted the leds with 3m tape, super glue and then vinyled over top of that to blend with my vinyled headlights (that I also did myself cheaply). I'm sure I could have taken it to a place to be done professionally and paid more money if that would have been better for you. Lol. But I think it looks like a nicely done overall headlights and taillights for the sixty total dollars I've invested into the heads and tails. Thanks for your time and comments.

[junior.29.dh]

Oh by the way I like your pics of your car too.

[2014FordFusionSE]

Looks great. DIY work is the most satisfying.

 

Were your tail-lights non-LED earlier?

[junior.29.dh]

No they were led. All I did to the tails was smoke vinyl the outer red part of the tails. I left the inner chromed look where he led lights are alone, but I am thinking of doing that part too. Thank you for commenting. If you want help or advice on something that you see I have done to my car, just ask. Also go check out my pics of my car in my gallery.

Edited July 5, 2014 by junior.29.dh

[Ram]

I like it. Its great to get some satisfaction doing upgrades yourself and with out breaking the bank doing so.

[SD Diver]

Looks good. Have you considered tapping the hot side into jumper 3 and the ground into the grounding post near the fuse box? This will mahe them more like true DRL - they'll be on whenever the car is on.

[higheroctave32]

Did you have to pop the bumper out to get to the stock lighting wires? I am thinking of doing something like this to use as a daytime running light down where the fog lights would be if my car had them, and something like this might do the trick nicely, but I really don't want to tear my car apart to do it lol.

[junior.29.dh]

No I didn't have to take the bumper off, but I would highly recommend to do it. I had a hell of a time by not doing it.