hybridbear Report post Posted December 5, 2013 I don't recall the old Fusion having this odd shaped compartment sticking off the air intake. Does everyone's car have this? Quote Share this post Link to post Share on other sites
GrySql Report post Posted December 5, 2013 As shown in this post, mine does not have that.Is it hollow underneath? To trap warm air from the engine? Quote Share this post Link to post Share on other sites
aschulz261 Report post Posted December 5, 2013 It is probably a resonance chamber to reduce/modify intake noise. 2 ptjones and B25Nut reacted to this Quote Share this post Link to post Share on other sites
acdii Report post Posted December 5, 2013 It is probably a resonance chamber to reduce/modify intake noise.This^^ They most likely added it to get rid of the low RPM drone. When the ICE is running at the most optimal speed to power ratio, which happens to be when it can hold the speed and use the least amount of fuel, it has this deep growl. Someone also mentioned that the 14 noise cancellation was better, and this addition may have helped. 1 hybridbear reacted to this Quote Share this post Link to post Share on other sites
SteveB_TX Report post Posted December 5, 2013 Yep. My Z has that funky thing. :) Quote Share this post Link to post Share on other sites
murphy Report post Posted December 5, 2013 My 2013 Energi also has it. 1 timf reacted to this Quote Share this post Link to post Share on other sites
dalesky Report post Posted December 5, 2013 How about if we just install a cold air intake, and get a tuner? Works on my Mustang! haha 2 GrySql and ptjones reacted to this Quote Share this post Link to post Share on other sites
hybridbear Report post Posted December 5, 2013 Fascinating! This must explain why the ICE in this car is noticeably quieter than the old one even when the ScanGauge shows similar HP and LOD numbers to what would make the noisy growl in the other car. Quote Share this post Link to post Share on other sites
B25Nut Report post Posted December 5, 2013 Now we have to find out how much it will cost to update our '13s with this chamber. 1 hybridbear reacted to this Quote Share this post Link to post Share on other sites
kbailey990 Report post Posted December 5, 2013 I'm thinkin' the same as B25Nut! This might be an inexpensive mod that works with our '13's Quote Share this post Link to post Share on other sites
acdii Report post Posted December 5, 2013 Just lean on it, oops it cracked, then take it in saying, it sounds noisy I hear a hiss and the CEL is on. :) Quote Share this post Link to post Share on other sites
GrySql Report post Posted December 5, 2013 The old FFH, FFE and MKZH part was this one from the Engine Air Box Cover schematic: Part # 9A624A Engine Air Box Tube 2.0 4V Dual Over Head Cam PFI Gas/Electric $43.00 Call your Dealer and see if they have the new design in stock, or can order the newly designed Tube. 2 B25Nut and hybridbear reacted to this Quote Share this post Link to post Share on other sites
corncobs Report post Posted December 5, 2013 The old FFH, FFE and MKZH part was this one from the Engine Air Box Cover schematic: Part # 9A624A Engine Air Box Tube 2.0 4V Dual Over Head Cam PFI Gas/Electric $43.00 Call your Dealer and see if they have the new design in stock, or can order the newly designed Tube.Thanks for posting this maybe we can upgrade our '13 for an even quiter ride and it's already very quite. Quote Share this post Link to post Share on other sites
gemdc Report post Posted January 25, 2014 I think the Atkinson cycle features used by our hybrids cause extra intake noise. The intake valves stay open longer such that part of the gas-air charge in the cylinder blows back into the intake to help the fuel mix on the next intake cycle. Intake noise is probably much of the ICE noise and this chamber acts to moderate intake sound. Still plenty of drone left. Wonder if some type of insulating wrap around the intake tube and maybe the actual (plastic?) manifold would help quieten the ICE? 1 B25Nut reacted to this Quote Share this post Link to post Share on other sites
GrySql Report post Posted January 25, 2014 I'm going to order the newly designed Intake Tube thru the Fusion Forum's Levittown Ford Dealer at their discount price, it's $28.90 plus shipping.This is the Part number Benny gave me, with no guarantee that it will fit. Quote Share this post Link to post Share on other sites
jeff_h Report post Posted January 25, 2014 Definitely was not in my 2013 SE Hybrid, as noted in the pics in the air filter replacement thread -http://fordfusionhybridforum.com/topic/7126-2013-air-filter-replacement/ Quote Share this post Link to post Share on other sites
hybridbear Report post Posted January 26, 2014 Definitely was not in my 2013 SE Hybrid, as noted in the pics in the air filter replacement thread -http://fordfusionhybridforum.com/topic/7126-2013-air-filter-replacement/Do both Energis have it though? Quote Share this post Link to post Share on other sites
jeff_h Report post Posted January 26, 2014 Do both Energis have it though? Yes, they were only built 5 weeks apart but I just checked both, and yes they both have it. 1 hybridbear reacted to this Quote Share this post Link to post Share on other sites
hybridbear Report post Posted January 26, 2014 Yes, they were only built 5 weeks apart but I just checked both, and yes they both have it.It appears the chamber was added on all Job 2 cars. I believe all Energis were Job 2 so it makes sense that they would all have it. 1 jeff_h reacted to this Quote Share this post Link to post Share on other sites
Boat Racer Report post Posted January 26, 2014 I just checked my '13 FFH Titanium and it doesn't have it and I think mine is a Job 2. I will stay tuned to this topic to see if those that have "retrofitted" the new style intake find that it will fit and if so, if it reduces noise. If so, it looks like an inexpensive and easy to install upgrade. :) Quote Share this post Link to post Share on other sites
corncobs Report post Posted January 26, 2014 BoatRacers comment made me curious and I checked mine. For sure a Job2 but no chamber. Quote Share this post Link to post Share on other sites
corncobs Report post Posted January 26, 2014 I did some "research" on cars.com and compared 14' vs. 13' and the few that I could find with a picture of the engine all the 14's had the chamber but none of the 13's. Maybe they added the chamber sometime thru the Job 2 but maybe also just starting with 14' MY. Quote Share this post Link to post Share on other sites
jeffo65 Report post Posted January 26, 2014 Just checked ours and we do have it on our 2013 FFH. . Quote Share this post Link to post Share on other sites
hermans Report post Posted January 26, 2014 Just checked ours and we do have it on our 2013 FFH. .When was yours built. Quote Share this post Link to post Share on other sites
jeffo65 Report post Posted January 26, 2014 When was yours built.Built May 2013 Quote Share this post Link to post Share on other sites
