mylx5oh Report post Posted February 13, 2009 Hello again, Ok so i know it may be a stupid question, but is it possible to add electronic climate control to a SE trim fusion? and change the trim pannel to the one in the SEL's with the clock? Quote Share this post Link to post Share on other sites
akirby Report post Posted February 13, 2009 Not very easily. There is more to it than just the controls. Quote Share this post Link to post Share on other sites
mylx5oh Report post Posted February 14, 2009 Yea thats what i figured, but it is technicaly possible? Quote Share this post Link to post Share on other sites
R3DALRT Report post Posted August 10, 2009 Yea thats what i figured, but it is technicaly possible? From what it looks like, yes. I found the ETAC w/o Heated Seats option, and I know there is a Temp Senor needed. On the back of the Electronic one, is a orange socket, and a white socket. The Manual SE trim has the orange socket w/ the voltage regulator on the back for speed control. What I would like to konw is if the white socket is for the temp senor portion. If so, then it shouldn't be a problem to swap. A sensor is pretty cheap at Fordparts.com (10 bucks). Anyone able to confirm? Quote Share this post Link to post Share on other sites
R3DALRT Report post Posted August 20, 2009 Boy was I mistaken. Yeah, there is definately more to it than just the module. Not only is a harness missing, but you would have to change the the harness connector into the blower motor and its speed controller. The electronic automatic temperature control module needs inputs from not only an ambient temperature sensor and in car sensor, but it also needs input from the sensor for the auto headlamps, which would be located in the middle of the front defroster grille. You would need to purchase this sensor because the electronic AC needs this to gauge solar input into the cabin! If you want, you could drill a hole into the existing grille, or purchase the specific defroster grille with the light sensor socket. So you would need to either buy the harness, or create your own, and then modify the blowers connectors from manual speed control. Then buy 3 addtional sensors. Its just not feasable after looking through the wiring diagrams and service manual #2. I bought an EATC on ebay for 50 bucks and I wont be able to use it! :banghead: At least I bought it for only 50 bucks........hope this helps. Quote Share this post Link to post Share on other sites
2010SEL Report post Posted August 20, 2009 Why bother? I have the automatic climate control in my SEL and I find myself overriding it a lot. Manual operation is better, IMHO. Quote Share this post Link to post Share on other sites
akirby Report post Posted August 20, 2009 Why bother? I have the automatic climate control in my SEL and I find myself overriding it a lot. Manual operation is better, IMHO. I never have to override mine. I just adjust the temperature. Why do you have to override it? Quote Share this post Link to post Share on other sites
2010SEL Report post Posted August 20, 2009 It doesn't always do what I want it to do. Maybe I need to RTFM? That's probably it. Quote Share this post Link to post Share on other sites
akirby Report post Posted August 20, 2009 It doesn't always do what I want it to do. Maybe I need to RTFM? That's probably it. If you want it to specifically blow air out of one spot or the other or you like having the fan blowing on your face regardless of the temperature then yes, you'll need manual controls. The only thing the auto climate control is meant to do is control the temperature of the cabin and you control that by adjusting the temperature up and down - just like you would do at home. It will do that just fine if left in auto mode. If you want more than that then that's not what it was designed to do. Quote Share this post Link to post Share on other sites
