Jump to content
kash80

2014 FFH SE HVAC Controls stopped beeping

Recommended Posts

I have a 2014 FFH SE, first owner. I have driven about 51k miles on it. Recently I discovered that the HVAC control buttons (not the ones on screen) don't make the beep sound when changing settings or switching on/off. As my car is out of warranty, was wondering if this is an indication of something bigger failing on the electronics side. It's due for a regular maintenance and will ask the dealer about it, but wanted to put this question out here first.

Share this post


Link to post
Share on other sites

It happened to my FFH 2014 once, and it was a strange behaviour caused, I think, by a bad 12 volt battery that needed replacement

Share this post


Link to post
Share on other sites

Update: The remote start also started working intermittently. Changed the battery on the remote, but didn't help. Finally ended up at the dealer. The took a whole day to diagnose the issue. Their solution was to re-flash the whole software of the car (that's what the dealer told me), which resolved the issue. The dealer said there's an updated version of the software but there's no TSB for it. Now, keep my fingers crossed that some other electronics issue doesn't pop up. This ended up costing me about $300 :cry:

Edited by kash80

Share this post


Link to post
Share on other sites

I've never heard any any beep from the climate control buttons on my 2015 FFH. See the attached image from the manual. Are those the buttons you referred to?

post-13031-0-69894500-1551182601_thumb.png

Share this post


Link to post
Share on other sites

I've never heard any any beep from the climate control buttons on my 2015 FFH. See the attached image from the manual. Are those the buttons you referred to?

Yep, these are the buttons. They did beep for me, until it stopped recently.

Share this post


Link to post
Share on other sites

The buttons on my 2015 S are different looking than what mwr posted above but mine have never beeped either.

Share this post


Link to post
Share on other sites

Ah ha, I found this in the owners manual for my 2015 FFH. See "Touch Panel Button Beep".

post-13031-0-86210300-1551205155_thumb.png

Share this post


Link to post
Share on other sites

The beeps apply only to "My Ford Touch" touch panel, right?

 

No, both the touch screen and any of the buttons on the panel below like fan speed, temp up down etc. post-13928-0-26857800-1551285167_thumb.jpg

Share this post


Link to post
Share on other sites

Does a FFH without "My Ford Touch" have beeping buttons? I don't think they do, but if I'm wrong, then I just learned another thing about my FFH from this forum.

Share this post


Link to post
Share on other sites

I looked when I went home last night. There are separate settings to turn on/off the tones for both My Ford Touch and the panel below.

Share this post


Link to post
Share on other sites

The touch-sensitive buttons below the big screen in the early Gen2 models with My Ford Touch (13-14, I think) beeped by default. Generally, they are a little frustrating to use, because you have to touch them just right, or they don't respond. Ford switched back to real, physical buttons on later models based on customer feedback.

Edited by md13ffhguy

Share this post


Link to post
Share on other sites

I have the touch sensitive buttons on my 2014. Sometimes when moving the gearshift, I accentally brush against one of the buttons. The heater may turn on or the radio stations may change.

 

I prefer real buttons like the later years have...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...