bodyguard295 Report post Posted March 7, 2008 I'm installing a new Pioneer AVIC-Z2 in my 2007 Fusion SEL and I need to find the Vehicle Speed Sensor. Does anyone know where I can find it? Any Pictures? I heard that it could be found in the factory radio harness because it has the adaptive volume control? I just don't know what color wire to look for or anyother location it may be. Please help! Quote Share this post Link to post Share on other sites
mml68 Report post Posted March 10, 2008 I'm installing a new Pioneer AVIC-Z2 in my 2007 Fusion SEL and I need to find the Vehicle Speed Sensor. Does anyone know where I can find it? Any Pictures? I heard that it could be found in the factory radio harness because it has the adaptive volume control? I just don't know what color wire to look for or anyother location it may be. Please help!looking at an illus. it show's me the sensor on top of the trans. case, there is a qty. of 2 of these sensors. Quote Share this post Link to post Share on other sites
bodyguard295 Report post Posted March 11, 2008 looking at an illus. it show's me the sensor on top of the trans. case, there is a qty. of 2 of these sensors. Is there a way you could send me the illus? I'm not sure where to look and what color wire to look for! Quote Share this post Link to post Share on other sites
FusionFanatic Report post Posted March 12, 2008 according to a post in another forum, it's a blue/orange wire that runs in a harness along the driver's side floor. click here for more details. good luck :) Quote Share this post Link to post Share on other sites
ickery Report post Posted April 13, 2008 I installed an AVIC D3 in my 07 using a Can Bus adapter from Stomp Audio made by pac' I think it was CR2FRD1 this adapter plugs into the factory radio harness and gives you VSS, Reverse signal and Parking brake wire all on the wire harness. This also keeps your factory input jack active. all without cutting wire. I was told by a Ford mechanic there is no access to a Vss signal on the car unless you use one of these adapters. Quote Share this post Link to post Share on other sites
royale192 Report post Posted August 13, 2008 can= control area network for fords. well vss is broadcast over this network from a few palces. one being abs wheel speed sensor 4 sensors all working into a inferred vss signal. Quote Share this post Link to post Share on other sites