ORRanger Report post Posted December 13, 2016 The wrench light on my 2013 hybrid Titanium came on last Friday night. The drive train shut down and I had to pull over (steering still worked). I shut off the car, then started again and was able to drive home normally with the wrench light still on. The next morning, there was no more light and it hasn't returned. I made an appointment with my dealer's shop to get this checked for error codes, but they called back to say it would be pointless unless the wrench light is on. But also only if I don't stop and restart the car because they say the stopping and restarting cancels out any information on the computer. I've never heard of this before. Does it make sense? I thought error codes were stored in the computer anytime a trouble light comes on. I'm also concerned because the car is on the cusp of the end of the warranty. My worry is that the light will come on again for the same problem just as the odometer kicks over and Ford's off the hook and I'm on it for any repairs. Is it possible that the wrench code came on when there was no problem? Some kind of "glitch?" Quote Share this post Link to post Share on other sites
DeeCee Report post Posted December 14, 2016 Don't have an answer to your problem but just a suggestion. You might get a better response to the issue if you would post it in a more relevant section of this forum such as the Fusion Hybrid Powertrain section. 1 ORRanger reacted to this Quote Share this post Link to post Share on other sites
mwr Report post Posted December 14, 2016 My suggestion is to save a record of your report to the dealer for future use. I'd probably email them a recounting of what you reported and their response, hopinng to get a reply from them. Then later after your warranty has expired and the problem re-occurs, you have evidence that the problem started during the warranty period and you reported it. Quote Share this post Link to post Share on other sites