Iwejun Report post Posted May 5, 2015 Are others having trouble sending your vehicle health report? I've tried numerous times in past month or so to no avail, gave up on it but was reminded to send it the other day and still it wouldn't work. TYIA Quote Share this post Link to post Share on other sites
murphy Report post Posted May 5, 2015 Are others having trouble sending your vehicle health report? I've tried numerous times in past month or so to no avail, gave up on it but was reminded to send it the other day and still it wouldn't work. TYIADo you have anything connected to your OBD II port? If you do it must be removed to run a report.I run a report of the first day of every month. No problems. Quote Share this post Link to post Share on other sites
aschulz261 Report post Posted May 6, 2015 I ran one the other day with no issues Quote Share this post Link to post Share on other sites
SteveB_TX Report post Posted May 6, 2015 (edited) Perhaps your subscription to Sync Services needs to be renewed? I had to renew mine today for another year. Edited May 6, 2015 by SteveB_TX Quote Share this post Link to post Share on other sites
murphy Report post Posted May 6, 2015 Perhaps your subscription to Sync Services needs to be renewed? I had to renew mine today for another year.Vehicle Health Report does not depend on an active Sync Services subscription. I let it expire on my 2010 FFH and continued to run VHRs. Quote Share this post Link to post Share on other sites
Iwejun Report post Posted May 10, 2015 Finally got it to go through, tried it once more and it was denied, then I hooked my phone with the cable and lo and behold it went through no problem. Quote Share this post Link to post Share on other sites
acdii Report post Posted May 11, 2015 Im still trying to run the first VHR on my truck and it tells me it can't until it has 200 miles on the Odometer, which is over 400 now. Goofy thing, cant update Sync site either until it runs a VHR. Quote Share this post Link to post Share on other sites
murphy Report post Posted May 11, 2015 Im still trying to run the first VHR on my truck and it tells me it can't until it has 200 miles on the Odometer, which is over 400 now. Goofy thing, cant update Sync site either until it runs a VHR. Make sure that you don't have a trip meter displayed. My 2013 Energi apparently grabs the odometer reading from the trip meter if it is displayed. 1 hybridbear reacted to this Quote Share this post Link to post Share on other sites
acdii Report post Posted May 11, 2015 OK i just had a OH DUH moment! LOL I have my scan gauge hooked up to display actual MPH. Bet thats what mussing it up. After all this time you would think I would know better. Quote Share this post Link to post Share on other sites
murphy Report post Posted May 11, 2015 OK i just had a OH DUH moment! LOL I have my scan gauge hooked up to display actual MPH. Bet thats what mussing it up. After all this time you would think I would know better.There definitely can't be anything connected to the OBD II port when a VHR is run. I ran into that with my 2010 FFH. Quote Share this post Link to post Share on other sites
SteveB_TX Report post Posted May 11, 2015 OK i just had a OH DUH moment!Better known as senility setting in! ;) Quote Share this post Link to post Share on other sites
acdii Report post Posted May 12, 2015 Well, thats not it. I pulled it off and was still not able to run a VHR saying it needed 200 miles on it, and it has over 500 now, Quote Share this post Link to post Share on other sites
murphy Report post Posted May 12, 2015 Well, thats not it. I pulled it off and was still not able to run a VHR saying it needed 200 miles on it, and it has over 500 now, Did you make sure that a trip meter is not displayed? Quote Share this post Link to post Share on other sites
acdii Report post Posted May 13, 2015 Finally got it to run. Had to drive 60 miles with the SG disconnected, then it ran. Now my Owners site is up to date. Need the VHR in order to do any Sync update reporting. All is good now. Quote Share this post Link to post Share on other sites
Hybrider Report post Posted May 13, 2015 ... Need the VHR in order to do any Sync update reporting... The VHR is not needed for reporting the SYNC update to owner.ford.com. I have updated to SYNC 3.7, and successfully reported it to the SYNC site, but have never run a VHR. Here are the steps for reporting the SYNC update as listed at the SYNC site, all done with only the USB thumb drive used for the update. 1) Remove the USB drive used to install the software update from your vehicle’s USB port and take it to your computer.2) Log in to your SYNC Owner account.3) Visit the SYNC Software Updates page. If you see a notification saying, "You have recently downloaded an update," then you are eligible to confirm that you were able to update your SYNC system successfully. Choose Confirm Update. If you do not see the Confirm Update button, you may need to manually report your SYNC software version. Visit the software report page and follow the on screen instructions.4) You'll be instructed to connect your computer to the USB drive that you used to install the SYNC software update to your vehicle. When you've inserted the USB drive, choose Report Update to Ford. 1 GrySql reacted to this Quote Share this post Link to post Share on other sites
acdii Report post Posted May 14, 2015 That did not work for me, and step one said to run a VHR to update the Sync site. I did the download, ran the instal, and tried to confirm the update but it kept failing. Once I did run a VHR the entire site updated. Might be a recent change to the site since I never needed one before. Quote Share this post Link to post Share on other sites
