Jump to content

poacheggs413

Fusion Hybrid Member
  • Content Count

    14
  • Joined

  • Last visited

About poacheggs413

  • Rank
    New Member
  1. Hello - I'm looking to pickup some rain guards (wind deflectors) for my 2011 SE. I have found the following link on Amazon: Window Rain Guards I am having a real hard time though finding a Sunroof wind deflector, does anyone know if the cutout is the same for the Focus and the Fusion? I found this link on Amazon as well: Sunroof Wind Deflector Any input or thoughts would be greatly apprecieated.
  2. Thanks for the reply's guys I'll post some pic's once the install is complete. Have a Happy Thanksgiving!
  3. I know the price from that site seems like the best I have found and the fact that multiple people from this forum have had nothing but good things to say about their products... its a no brainer. Thank for the feedback in regards to the additional parts I'm going to look to order these ASAP.
  4. Looks good, I'm looking at the same exact kit (35w / 5k). I'm not going to hard-wire them like you did however, not sure how much the dealership would appreciate that when I come off lease. Did you need any other parts that DDM offers like the Error Eliminator or the HID Harness?
  5. I had a 2002 Lincoln LSE and had a very similar issue. Along with the volume controls on the steering wheel not working the horn worked intermittently and for some reason the engine temperature gauge would show a reading of overheating. It turned out the clock spring was the culprit and once changed out all those issue were resolved. From what i recall it was around $200 with parts and labor at my local mechanic. Good Luck
  6. Thanks Akirby, the wife is 4 months prego so when she says she want's a Honda Pilot we get a Honda Pilot :finger: I did a little digging online and couldn't find anything that is similar to this device. I might have to make a trip to my local Fast and the Furious-esque car shop and see if they have any solutions. Thanks again for the reply - have a great Thanksgiving
  7. An alternative to hooking up the remote wire to the factory harness you could install an inexpensive switch. I found this setup to be beneficial in situations like driving through, neighborhoods, parking lots or any other spots where you don't want to advertise what you have in the trunk. Having it wired to a switch allows for an immediate shut down of the bass. Rocker Switch - Radio Shack
  8. Hello - Has anyone attempted to install a car seat in the rear passenger seat of their Fusion? Aside from the normal frustration that comes with installing a car seat :) I found that the mount behind the head rest was too close / too far down which in turn wouldn't allow for a tight connection for the upper latch hook. I'm installing a Even Flo Titan series car seat. Has anyone else had any experience with this?
  9. I just picked up my 2011 SE on Friday which came with the "stock" floor mats, no logo from what I can recall but I also wasn't looking for it either. I literally just came in from putting down the all weather mats (they were in the trunk not sure if the dealer meant to give them to me) and they have the word FUSION as part of the molded rubber on the front mats, nothing on the rear mats.
  10. Does anyone have a good source for a sunroof wind deflector / rain guard? This would be for a 2011 Fusion SE
  11. Good Morning - does anyone know will these Key Pads work with other vehicles as well? I assume that since they're programmable in theory you could use this with any car manufacturer not just Ford right? I ask because the wife just handed over her Ford Escape lease and picked up a Honda Pilot. One of the first thing she commented on was the lack of the key-less entry keypad. Thank in advance everyone for your input on this.
  12. @ jona2125 that looks really good. How big of sheet did you buy to do all the lights and the grill? I assume you had to remove the grill to fully cover it?
  13. I like the way that looks, and after looking at eBay I'm not about to sped $100 on smoked side markers. I have a few questions if you don't mind: - What did you use to black out the plastic? - Did you have to pull the housing apart to install the LED strip? - For power, did you splice the LED wires into the factory harness?
  14. This is a really clean look. I went to the website and there is alot going on there. Just to be clear you installed the Silver Tipped Amber Bulbs?
×
×
  • Create New...