Jump to content

popsracing

Fusion Hybrid Member
  • Content Count

    6
  • Joined

  • Last visited

About popsracing

  • Rank
    New Member
  1. A tune will make a huge improvement! Seen as much as 5 mpg around town improvement and obvious HP/TQ gains
  2. Anyone try the Nokian WR G2 or Bridgestone RE960AS tires?
  3. I'm considering Yokohama Avid W4S for all season tread. Has anyone utilized these tires? Do they get good treadware? Are they a quiet and smooth riding tire?
  4. Very easy, use a small flathead to release the four retention clips, unplug the three connectors, and install the new switch and it's done. Just follow the programming sequence I mentioned earlier.
  5. The swap to the autolamp switch does work. The part number Motorcraft part #SW--6602 8E5Z-11654-CA The headlamp exit delay worked after programming. Directions: Autolamps - programmable exit delay Programmable exit delay allows the length of the autolamp exit delay to be changed. To program the auto lamp exit time delay: 1. Start with ignition in the LOCK position and the headlamp control in the autolamp postition. 2. Turn the headlamp switch to O. (off) 3. Turn the ignition switch to RUN and then back to LOCK. 4. Turn the headlamp switch to the autolamp postition. The headlamps with turn on. (occasionally the first time through the steps the headlamps won't turn on) 5. Wait the desired amount of time for the exit delay you want. (up to three minutes), then turn the headlamp switch to O. (off) The headlamps will turn off. http://www.autodealertools.com/quickQuote/...2008/Fusion.pdf
×
×
  • Create New...