dag1401

I'm sorry your having issues did you try the "Wht/Lt Purple wire" he mentioned? I didn't need a switched 12v wire myself as a chose an amp with newer technology and will auto sense signal on the line in ;) If i were you or if i needed more accessories on my fusion i'd wire in my own switched 12v fuse block running from a relay.. just me though.. do you have a volt meter? might be your quickest method to get your stuff up and working. EDIT: I saw the wires he was talking about when i tapped into the front driver speaker wires but didn't need it so i left it alone. Its there though i verified his instructions are correct at least for a 2013

Great write up m1xmstr, I just finished installing a JBL ms-a5001 500watt RMS amp and paired it with a single 10 inch Dayton 10-22 Ultimax sub in a .71 cu ft sealed box. Its a great compliment to this car. I have the amp turned down a bit still as i'm not sure how hard to push it yet. So far very happy and it sounds great. Its definately not a 12 inch 1750 watt rms SSA XCON but it fits the roll well. Again great write up definately saved me a lot of time finding what wires to tap into for the power input.