Ohmster

Hyabrid, Last question. I looked at your pix (nice!) and reread some of your earlier posts. You installed only the front and rear 3D pieces correct? How do the lines look from the sides without the side skirts? Are the front and rear pieces lower than the OEM skirt? I'd like to only do the rear piece (with the dual conversion) if I can get away with it, but am 'concerned' that the low point of the rear piece by the wheel will be lower than the OEM skirt on the other side of the wheel. Could you post a picture of your side profile? Thanks!

This is the parts quote I have: Lower Trim Panel w/park sensors w/dual exhaust (DS7Z17K922CA) $197.40Valance panel w/auto park primed (DS7Z1810DAPTM) $322.68 - not needed if you get 3D Carbon Kit Lower Skirt for 178.50??Exhaust Tips (DS7Z1F827A and B) 199.37 eachHyabrid, can you share where you bought the OEM parts from as some of my pricing seems higher. You mentioned the tips at $150 ea vs my $199 ea. Our valence pricing is about the same based on your previous posts. On a side note, I have the same shop quoting me $350 do to the grill in black and $150/wheel to paint. Does anyone have experience with painted wheels? Is it durable?

Interesting. I got a body shop to quote me on converting the Hybrid Titanium single exhaust to dual. The parts alone were somewhere near 900 (I'd have to go check). Total was 1,400. So what I think you are saying is I don't need Ford PN DS7Z-17810-DAPTM or DS7Z-17K922-CA if I intend on getting the 3D Carbon kit Rear Lower Skirt PN 692036 for 178.50. Only Ford parts needed are the two tips? Correct? Is the Lower Skirt 3 pieces or 2? And it comes primed, not painted I assume. Also, does the Front Air Dam go over existing parts or replace? Thanks for all the info so far!

I use many of the Zaino products but have not tried their plastic polish. Let us know how it does!

That's likely valid.... :)

I spent seven years in upstate New York and another ten in Canada. I've done by time on the east coast. :) Happy here, and no one I know on right coast uses them....that doesn't mean much, but just say'n....

That's for sure. No matter how good it looks or how much you love it, 90% of the time it makes it harder to sell. And usually dealers shun your vehicle or low ball you at trade-in time. :)

Not to offend, but aren't these things so '90's? I've lived in SoCal for over twenty years, never used one, never had any damages to any dashes from the heat.

Thanks. No charge as I had him do it as part of my usual package. He's done several of my cars (G35C, M45S, GTR, and now the Fusion)....Picture attached, but you really can't see it. It goes full length from the armrest and around the parking break switch.....it's really dirty so don't let that fool you.

I had my clear bra installer custom fit a piece there (cup holder area). Looks great and it will never get scratched...