IraF Report post Posted October 20, 2013 (edited) Car Wash, Rinse, Air DryHome, Finished DryingUsed Detailers Polish and then removed residue with MicroFiber ClothApply Opti-Coat 2.0 sparingly let sit 3 minutes and then used MicroFiber Cloth to Remove any residue that was not leveling Did Chrome wheels, trim and windows(If you know what you are doing)Started with Opti-Coat 2.0 20cc and have left ~14ccDid Apply Opti-Coat 2.0 on headlights, fog Lights and tail Lights and invisible bra.Total Time 4.5 Hrs Edited October 20, 2013 by IraF 3 djminfll, hybridbear and GrySql reacted to this Quote Share this post Link to post Share on other sites
Bob Teddy Report post Posted October 23, 2013 Looks great! Getting mine done by someone friday.... Afraid to do it myself Quote Share this post Link to post Share on other sites
IraF Report post Posted October 23, 2013 Thank you, I did the water test with a hose and it flows off like a sheet, however it left water marks, and I removed those spots, this morning we had dew, mist and the car had beads of water, but once it dried I didn't see any water spots. Point being water from the hose has plenty of minerals to cause the spots, but not rain water or dew/mist on your car. It took long because I used detailers/polish and then used opti-coat 2.0. it doesn't really take much to apply and since I have about 70% left I will do her Toyota Yaris when we get two decent days of weather. I did mine at 60F and two days later we got some rain. I used the little blue gadget that came with it although some detailers just remove the black screw on and squirt it on a pad, more comes out and I didn't think that was necessary. Opti-Coat 2.0 is for the consumer although one could use the commercial stuff and the consumer grade take longer in leveling then the commercial grade so it wasn't necessary to rush the job and had it been the commercial one would have to work fast. Quote Share this post Link to post Share on other sites
