2019 Hybrid TItanium - Driver Side Engine Mount Replace???

[tcobb]

I just joined the Forum today and purchased a 2019 Ford Fusion Hybrid TItanium in July 2022.  Seemingly in great shape, but had a few vibrations, so I decided to replace the motor/transmission mounts.  Underside rear mount was a bit hard to replace but completed it successfully yesterday.  My brother and I were working on the car (reasonably competent weekend mechanics) and we googled and YouTubed the replacement of the Driver Side Upper Mount and could not find any instructions anywhere.  We spent several hours taking the top engine shroud and brackets off, but could not figure out how to remove the FUSE BOX tray that sits just to the side of the Mount (need to remove it to get at one of the three to five bolts on the mount.  Can anyone provide instructions on how to remove and replace this Driver Side Mount with pictures if possible (understand if no pictures) and if there are no instructions on how to remove the Mount; could anyone tell us how to get the FUSE BOX that is just to the right (in the photo, taken at from the front of the engine looking at driver side).   Three pictures show a close up of the Fuse box with the Bolt and bracket from the Mount showing just to the upper left in picture (there is some fastener under the fuse box that we could not locate and would not let us pull the fuse box out, after we removed the two black cables with the black boxes on in the picture.....must be a trick to taking the fuse box out and we did not want to break the box or connections).  The middle picture is from the front of the engine looking back towards driver side steering wheel, shows the location of the mount in the upper middle with black 1 inch bracket and bolt just peeking out (between the orange cable and red/positive battery cable that connects to the fuse box).  Picture on far right is a close up of the black mount bracket and bolt on top of the mount.....I believe there are three bolts around the outside of the middle bolt, that need to be removed to get the mount out.  MAIN PROBLEM STOPPING US, IS THE FUSE BOX REMOVAL, TO GET SOCKET/RATCHET TO THE RIGHT OF THE MIDDLE BOLT YOU SEE IN THE PICTURES, TO REMOVE THAT MOUNT BOLT.  Thanks for any help from the forum members who may have replaced their mounts or knows how to remove the fuse box completely from the bay to get at the lower bolt for the mount, which the fuse box sits on top of.