OBD: Tire Pressure & Oil Life

[jdbob]

I've got some custom PID information for TPMS readings and Oil Life remaining percentage. Tested using OBD Fusion (OF) on an iPad, I've included what I think the values for Torque Pro (TP) should be.

 

OF Mod. TP Hdr. Mode PID Name Min Max Unit Formula Past Decimal

7E8 7E0 22 054B Oil Life 0 100 % A 0

72E 726 22 2813 Left Front 0 60 PSI (A*256+B)/20 1

72E 726 22 2814 Right Front 0 60 PSI (A*256+B)/20 1

72E 726 22 2815 Right Rear 0 60 PSI (A*256+B)/20 1

72E 726 22 2816 Left Rear 0 60 PSI (A*256+B)/20 1

 

ScanGauge codes provided by TOM_NC_1

 

Oil Life Remaining in %.

TXD: 07E022054B RXF:

04620505064B

RXD: 3008

MTH: 000100010000

NAM: OLR

 

Left Front Tire Units:PSI

TXD: 0726222813

RXF: 046285280613

RXD: 3010

MTH: 000100020000

NAM: PS1

 

Right Front Tire Units:PSI

TXD: 0726222814

RXF: 046285280614

RXD: 3010

MTH: 000100020000

NAM: PS2

 

Right Rear Tire Units:PSI

TXD: 0726222815

RXF: 046285280615

RXD: 3010

MTH: 000100020000

NAM: PS3

 

Left Rear Tire Units:PSI

TXD: 0726222816

RXF: 046285280616

RXD: 3010

MTH: 000100020000

NAM: PS4

 

[Griswald]

Cool, I could never get values for tire pressure to work.

[jdbob]

Cool, I could never get values for tire pressure to work.

 

Let us know if it does work. These values were tested on C-Max Energi & Hybrid. Even though the Fusions have the same power-train they also have more bells and whistles than the lowly C-Max so the Body Control Module (where the tire pressures are stored) might be completely different in the Fusion.

[billford]

I just bought a new Scangauge2. I tried the tire pressure codes and they worked fine on a 2014 Fusion Hybrid.

I also used the Transmission Fluid Temperature codes from post 105, http://fordcmaxenergiforum.com/topic/1293-scangauge-x-gauges-programming-c-max-ffh/page-6?

 

The only thing else I want, but I can't get working is the Motor Electronics Coolant Temperature...

Edited April 19, 2015 by billford

[jdbob]

The only thing else I want, but I can't get working is the Motor Electronics Coolant Temperature...

 

 

Looks like there are 4 temperature sensors, here's what the OBDSM1402_HEV.pdf document says about temperature limits:

 

Voltage Boost Converter (VVC) IGBT temperature > 139 deg C OR

Voltage Boost Converter (VVC) Inductor temperature > 159 deg C OR

Generator Inverter IGBT temperature > 123 deg C OR

Motor Inverter IGBT temperature > 123 deg C

 

Don't know if all four sensors can be read or whether some module just throws an error if any of them exceeds those limits.

 

UPDATE: No luck finding any of those using ForScan. No sign of the inverter coolant temperature either.

Edited April 19, 2015 by jdbob

[hybridbear]

The only thing else I want, but I can't get working is the Motor Electronics Coolant Temperature...

FORScan doesn't show this data either. I would think that the car is monitoring it, but maybe not...

[Automate]

... here's what the OBDSM1402_HEV.pdf document says .... :

 

Nice document find. Here is a link to other year OBD documents.

https://www.motorcraftservice.com/vdirs/diagnostics/default.asp?pageid=diagnostic_theory&gutsid=diagsheet

Edited April 20, 2015 by Automate

[billford]

Here's some more Hybrid info from Ford: https://www.motorcraftservice.com/vdirs/retail/default.asp?pageid=free_quickref&gutsid=quickref&menuIndex1=13


And here's Ford capacities, chemicals...https://www.fcsdchemicalsandlubricants.com/main/quickref.asp