Jump to content





Welcome to Ford Fusion Hybrid Forum


Sign In  Log in with Facebook

Create Account
Welcome to Ford Fusion Hybrid Forum, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of Ford Fusion Hybrid Forum by signing in or creating an account.
  • Start new topics and reply to others
  • Subscribe to topics and forums to get email updates
  • Get your own profile page and make new friends
  • Send personal messages to other members.
 
Guest Message by DevFuse

Posted Image
Register your Fusion Hybrid at the official Ford authorized registry here.


Photo
- - - - -

Hybrid 110V outlet not working


  • Please log in to reply
4 replies to this topic

#1 OFFLINE   Swiftd03

Swiftd03

    New Member

  • Fusion Hybrid Member
  • 3 posts
  • Region:Decline
  • Location:United States
  • Current Vehicle:None
  • My Hybrid's Year:Decline

Posted 24 January 2014 - 01:32 PM

So, I've finally been driving my new car and tried using the 110v outlet today. I can not get it to work with a laptop or with my Iphone charger. Is there something I need to do to turn it on or some sort of requirement I'm missing?









Lose this advertisement by becoming a member. Click here to create a free account.


#2 OFFLINE   acdii

acdii

    Fusion Hybrid Legal Resident

  • Fusion Hybrid Member
  • 8,174 posts
  • Region:U.S. Great Lakes
  • Location:Harvard
  • Current Vehicle:2013 HyTi, 2013 Flex EbTi
  • My Hybrid's Year:2013

Posted 24 January 2014 - 02:18 PM

I dont recall a setting anywhere to enable it. Should be powered on when you start the car. 


Drive Smarter, Not Faster

Posted Image
https://www.facebook.../12595DesertRat

#3 OFFLINE   corncobs

corncobs

    Fusion Hybrid Fanatic

  • Fusion Hybrid Member
  • 2,836 posts
  • Region:U.S. Great Lakes
  • Location:Chicago NW Burbs
  • Current Vehicle:2013 FFH
  • My Hybrid's Year:2013

Posted 24 January 2014 - 03:31 PM

The laptop could be to big but IPhone should work just fine. Is it maybe not connected / plugged in all the way. The outlet springs are pretty weak.
2013 Ford Fusion Hybrid SE - Lady in Red
Ruby Red / 505A, Tech Pkg, Rear Sensing System, 18" Luxury Wheels
 
215477.png

#4 OFFLINE   hermans

hermans

    Fusion Hybrid Addict

  • Fusion Hybrid Member
  • 1,341 posts
  • Region:Decline
  • Location:USA
  • Current Vehicle:2015 MKC - 2013 MKZh
  • My Hybrid's Year:2013

Posted 24 January 2014 - 03:57 PM

The laptop could be to big but IPhone should work just fine. Is it maybe not connected / plugged in all the way. The outlet springs are pretty weak.

I doubt the laptop is over 150 watts. I think the springs are very weak. My cell phone plug has fallen out a few times. Backseat passengers really like it though.


2016 Edge Titanium

2015 Lincoln MKC

2013 MKZ Hybrid

 

"Your comment is in no way productive. Why don't you find something productive to say?" - hybridbear

 


#5 OFFLINE   GrySql

GrySql

    Fusion Hybrid Fanatic

  • Fusion Hybrid Member
  • 3,168 posts
  • Region:Decline
  • Location:So Cal
  • Current Vehicle:Yes
  • My Hybrid's Year:Decline

Posted 24 January 2014 - 08:08 PM

Make sure the ignition key is on and check the indicator light to see what stage the power point is in. 

As mentioned, make sure your device is plugged in securely.

If it does not re-set after following the instructions below the Dealer will need to see what is wrong.

 

Page 142 of the Owner's Manual.

"The power point is used for powering electrical devices that require up to 150 watts. It is located on the rear of the center console.

When the indicator light, located on the power point, is:

  • on power point is ready to supply power.

  • off power point power supply is off; ignition is not on.

  • flashing power point is in fault mode.

Auxiliary Power Points

The power point temporarily turns off power if the 150 watt limit is exceeded.

It can also switch to a fault mode when it is overloaded, overheated, or shorted. Unplug your device and switch the ignition off then on for overloading and shorting conditions.

Let the system cool off, then turn the ignition off then on for an overheating condition.

The power point is not designed for electric devices such as:

  • Cathode ray tube type televisions

  • Motor loads, such as vacuum cleaners, electric saws and other electric power tools, compressor-driven refrigerators, etc.

  • Measuring devices, which process precise data, such as medical equipment, measuring equipment, etc.

  • Other appliances requiring an extremely stable power supply: microcomputer-controlled electric blankets, touch sensor lamps, etc. "


Edited by GrySql, 24 January 2014 - 08:09 PM.

The Time Machine....
'13 FFH SE - Platinum White
Custom ordered, build date: 11/30/12, delivered: 12/12/12 - Sold: 09/05/15
 




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Privacy Policy Terms of Service ·