cinelli Report post Posted March 16, 2010 (edited) Hi guys. This is my first post so, let me introduce myself.I am from Brazil and I am a happy owner of a 2008 Ford Fusion 2.3 SEL. This morning I was trying to acces the IFS (Inertia Fuel Shutoff ) switch connector (not the switch itself, but the connector on its bottom and its cables), so I had to take off the front door scuff plate in the passenger side. I was able to release it from its 3 clips, but one of them (the clip of the A-pillar) fell inside A-pillar. How do I take it off?Do I have to take off the protection and insulation near de rear wheel in C-pillar?Or is it under the carpet/rug? Thanks in advance,Andre PS: So you may know what I was doing: I was going to install a relay to control the fuel pump, so I could block my car using my cell phone and the TLT-1B gps tracker that I've bought at dealextreme.PS2: Sorry for any english errors. Edited March 16, 2010 by cinelli Quote Share this post Link to post Share on other sites
cinelli Report post Posted March 21, 2010 I was able to get the lost clip by taking apart the IFS and cables support. Quote Share this post Link to post Share on other sites