Jump to content





Welcome to Ford Fusion Hybrid Forum


Sign In  Log in with Facebook

Create Account
Welcome to Ford Fusion Hybrid Forum, like most online communities you must register to view or post in our community, but don't worry this is a simple free process that requires minimal information for you to signup. Be apart of Ford Fusion Hybrid Forum by signing in or creating an account.
  • Start new topics and reply to others
  • Subscribe to topics and forums to get email updates
  • Get your own profile page and make new friends
  • Send personal messages to other members.
 
Guest Message by DevFuse

Posted Image
Register your Fusion Hybrid at the official Ford authorized registry here.


Photo
- - - - -

Windows (1 Up/Down)


  • Please log in to reply
26 replies to this topic

#1 OFFLINE   rdr

rdr

    New Member

  • Fusion Hybrid Member
  • 21 posts
  • Region:U.S. Southern Atlantic
  • Location:Virginia
  • Current Vehicle:2019 Ford Fusion Hybrid Titanium 2018 Ford Fusion S 2017 Ford Fusion Hybrid SE 2017 Ford Fusion S 2016 Ford Fusion Hybrid SE 2016 Ford Fusion Hybrid S
  • My Hybrid's Year:2019

Posted 03 January 2017 - 10:18 PM

I just took delivery of a ruby red tint coat 2017 FFH SE (601A Package) last week. Tonight, I rolled down the front passenger window by pressing the button just like I have done in my other FFH cars (2015 and 2016). When I pulled on the switch to raise the window, it would only go up as long as I was pulling on the switch rather than going all the way up with a short pull on the switch. The Munroney sticker for the car indicates that the standard equipment includes the 1 up/down feature for both the front and rear windows. I looked in the configuration screens for the windows, and there is no configurable setting for this feature.

Any ideas as to what is going on?







Lose this advertisement by becoming a member. Click here to create a free account.


#2 OFFLINE   murphy

murphy

    Fusion Hybrid Addict

  • Fusion Hybrid Member
  • 1,524 posts
  • Region:U.S. Northeast
  • Location:PA
  • Current Vehicle:2013 Fusion Energi Titanium

Posted 04 January 2017 - 05:32 AM

It probably needs to be reset.  Unfortunately I no longer remember the reset procedure.



#3 OFFLINE   jeff_h

jeff_h

    Fusion Hybrid Addict

  • Fusion Hybrid Member
  • 1,774 posts
  • Region:U.S. Southern Atlantic
  • Location:Virginia
  • Current Vehicle:Fusion Energi Titanium
  • My Hybrid's Year:2013

Posted 04 January 2017 - 06:48 AM

It probably needs to be reset.  Unfortunately I no longer remember the reset procedure.

 

Here's how it worked on my 2013, I expect it hasn't changed:

 

1 - Hold button *down* and roll window *down* all the way and continue to hold for 3 seconds

 

2 - Hold button *up* and roll window *up* all the way and continue to hold for 3 seconds

 

3 - Hold button *down* and roll window *down* all the way and continue to hold for 3 seconds

 

4 - Hold button *up* and roll window *up* all the way and continue to hold for 3 seconds

 

That should run that particular window through the cycle so the sensors re-learn the limits, and the auto-up and auto-down should then work -- good luck.


  • Timewellspent likes this

2013 Fusion Titanium Energi Deep Impact Blue

 

204627.png

 


#4 OFFLINE   thavil

thavil

    Fusion Hybrid Member

  • Fusion Hybrid Member
  • 166 posts
  • Region:U.S. Northeast
  • Location:Maryland
  • Current Vehicle:2013 Ice Storm FFH FE w/Luxury Package

Posted 04 January 2017 - 01:09 PM

What jeff_h said, spot on. I have a 2013 Job 1 FFH and I have to relearn either the driver's side or passenger side almost monthly.


Mods/accessories:
Tint 35%
LED license plate and trunk lights
Husky WeatherBeaters floor mats
Covercraft sun screen
Proclip cell phone holder
Stubby antenna (4")
LED puddle lamps (DaytimeBrightLites)
AVS in-channel window vents
Mud flaps (OEM) front/rear
(Shhh, the wife only knows about half of them!)


#5 OFFLINE   rdr

rdr

    New Member

  • Fusion Hybrid Member
  • 21 posts
  • Region:U.S. Southern Atlantic
  • Location:Virginia
  • Current Vehicle:2019 Ford Fusion Hybrid Titanium 2018 Ford Fusion S 2017 Ford Fusion Hybrid SE 2017 Ford Fusion S 2016 Ford Fusion Hybrid SE 2016 Ford Fusion Hybrid S
  • My Hybrid's Year:2019

Posted 04 January 2017 - 01:38 PM

Which door switch panel needs to be used? I was operating the window from the driver's door. I have never had this issue with any of my other FFH cars, including the 10, 13 and 15 that are now with new owners.

Also, what does the term "2013 Job 1 FFH" mean?

#6 OFFLINE   murphy

murphy

    Fusion Hybrid Addict

  • Fusion Hybrid Member
  • 1,524 posts
  • Region:U.S. Northeast
  • Location:PA
  • Current Vehicle:2013 Fusion Energi Titanium

Posted 04 January 2017 - 02:10 PM

Job 1 is the initial production build run for a model year. 

When enough design changes have been accumulated they terminate the Job 1 run, retool, and begin the Job 2 run.


  • thavil likes this

#7 OFFLINE   Cobra348

Cobra348

    Fusion Hybrid Enthusiast

  • Fusion Hybrid Member
  • 526 posts
  • Region:U.S. Northeast
  • Location:Oswego, NY
  • Current Vehicle:Ruby Red wLight Stone Leather
  • My Hybrid's Year:2017

Posted 04 January 2017 - 05:12 PM

I've not had this on my current or prior FFH, but a couple Fiestas I had before Fusion seemed to do this about 2-3 times a year.  Same reset process for them as well.


Larry - aka Cobra

 

Big Red: 2017 FFH SE, Ruby Red, Med Light Stone leather

602A SE Luxury Package, Park Assist, Adaptive Cruise Control w/stop & go

Driver Assist Pkg (lane keeping, BLIS, auto high beams, rain-sensing wipers, heated steering wheel)

My additions:  WeatherTech lasercut floor mats, in-channel wind deflectors (dark smoked),

Steeda strut tower brace, Steeda rear sway bar, Steeda hood struts, Ford donut spare,

blacked out grille

Summer rims/tires - 17" Verde Regency rims with OEM tread

Winter rims/tires - 17" OEM rims with Goodyear UltraGrip WRT Ice


#8 OFFLINE   rdr

rdr

    New Member

  • Fusion Hybrid Member
  • 21 posts
  • Region:U.S. Southern Atlantic
  • Location:Virginia
  • Current Vehicle:2019 Ford Fusion Hybrid Titanium 2018 Ford Fusion S 2017 Ford Fusion Hybrid SE 2017 Ford Fusion S 2016 Ford Fusion Hybrid SE 2016 Ford Fusion Hybrid S
  • My Hybrid's Year:2019

Posted 04 January 2017 - 08:23 PM

Funny thing happened when I went out to the car this evening . . . The windows worked as they should! Thank you for your help.
  • jeff_h likes this

#9 OFFLINE   stlouisgeorge

stlouisgeorge

    Fusion Hybrid Member

  • Fusion Hybrid Member
  • 137 posts
  • Region:U.S. Mississippi
  • Location:Saint Louis
  • Current Vehicle:Ford Fusion Hybrid Platinum (Shadow Black)
  • My Hybrid's Year:2017

Posted 13 January 2017 - 11:37 AM

Funny thing happened when I went out to the car this evening . . . The windows worked as they should! Thank you for your help.

I have had my 2017 FFH Platinum for 10 days. Off the lot the "1Up/Down" drivers window feature didn't work. Then for one time it worked. Now it doesn't work.

I wonder if this is related to other, similar settings which can be reset using this procedure on page 262 of the manual:
To restore the settings, do the following:
1. Apply the parking brake.
2. Shift into park (P) or neutral (N).
3. Switch off all accessories.
4. Press the brake pedal and start your vehicle.
5. Run the engine until it reaches normal operating temperature. While the engine is warming up, complete the following: Reset the clock. See Audio System (page 314). Reset the power windows bounce-back feature. See Windows and Mirrors (page 81). Reset the radio station presets. See Audio System (page 314).
6. Allow the engine to idle for at least one minute.



#10 OFFLINE   murphy

murphy

    Fusion Hybrid Addict

  • Fusion Hybrid Member
  • 1,524 posts
  • Region:U.S. Northeast
  • Location:PA
  • Current Vehicle:2013 Fusion Energi Titanium

Posted 13 January 2017 - 01:54 PM

I have had my 2017 FFH Platinum for 10 days. Off the lot the "1Up/Down" drivers window feature didn't work. Then for one time it worked. Now it doesn't work.
 


Read post #3 in this thread for instructions to reset a window.



#11 OFFLINE   devinron

devinron

    New Member

  • Fusion Hybrid Member
  • 28 posts
  • Region:U.S. Mountain
  • Location:Fl
  • Current Vehicle:Fusion
  • My Hybrid's Year:2012

Posted 20 January 2017 - 02:45 AM

Since the car is new,  I would go to the dealership for them to inspect the problem.



#12 OFFLINE   stlouisgeorge

stlouisgeorge

    Fusion Hybrid Member

  • Fusion Hybrid Member
  • 137 posts
  • Region:U.S. Mississippi
  • Location:Saint Louis
  • Current Vehicle:Ford Fusion Hybrid Platinum (Shadow Black)
  • My Hybrid's Year:2017

Posted 30 January 2017 - 07:59 PM

Here's how it worked on my 2013, I expect it hasn't changed:
 
1 - Hold button *down* and roll window *down* all the way and continue to hold for 3 seconds
 
2 - Hold button *up* and roll window *up* all the way and continue to hold for 3 seconds
 
3 - Hold button *down* and roll window *down* all the way and continue to hold for 3 seconds
 
4 - Hold button *up* and roll window *up* all the way and continue to hold for 3 seconds
 
That should run that particular window through the cycle so the sensors re-learn the limits, and the auto-up and auto-down should then work -- good luck.

My driver window won't go up or down automagically. It didn't off the lot, then it did, now it doesn't.
Made a fool of myself waiting for my Culver's in the drive through trying this (didn't work on 2017 FFH..)

#13 OFFLINE   jeff_h

jeff_h

    Fusion Hybrid Addict

  • Fusion Hybrid Member
  • 1,774 posts
  • Region:U.S. Southern Atlantic
  • Location:Virginia
  • Current Vehicle:Fusion Energi Titanium
  • My Hybrid's Year:2013

Posted 31 January 2017 - 06:56 AM

My driver window won't go up or down automagically. It didn't off the lot, then it did, now it doesn't.
Made a fool of myself waiting for my Culver's in the drive through trying this (didn't work on 2017 FFH..)

 

As I understand it, the steps noted above are a way to cycle the sensors to re-learn the upper and lower limits of the window -- if that doesn't work maybe one of the sensors is bad and it's time for a trip to the dealer.


2013 Fusion Titanium Energi Deep Impact Blue

 

204627.png

 


#14 OFFLINE   Drubs

Drubs

    New Member

  • Fusion Hybrid Member
  • 1 posts
  • Region:U.S. Pacific Coast
  • Location:Oregon
  • Current Vehicle:Fusion Hybrid SE
  • My Hybrid's Year:2017

Posted 03 February 2017 - 08:28 PM

I'm having a somewhat similar issue.  I just got the car in December and I've had issues with the "bounce back" feature of the auto up windows.  For those that don't know, the windows are designed to go back down if they detect an obstruction when going up.  

 

My problem is that this seems to happen when the window just normally hits the top.  I can't close the windows all the way because as soon as they hit the top, they bounce back down.  I can get quite close to all the way up (to the point it is still water tight), but it's not quite a full seal.  

 

Here's the strangest part, at first this was only an issue with the driver's door.  Now it's only an issue with the front passenger door.  It moved!  Its winter so I really have very little need to open the windows at all.  



#15 OFFLINE   murphy

murphy

    Fusion Hybrid Addict

  • Fusion Hybrid Member
  • 1,524 posts
  • Region:U.S. Northeast
  • Location:PA
  • Current Vehicle:2013 Fusion Energi Titanium

Posted 04 February 2017 - 06:08 AM

Check the window tracks for material that shouldn't be there.

 

Use the process in post #3 to synchronize the windows with the up and down sensors.



#16 OFFLINE   stlouisgeorge

stlouisgeorge

    Fusion Hybrid Member

  • Fusion Hybrid Member
  • 137 posts
  • Region:U.S. Mississippi
  • Location:Saint Louis
  • Current Vehicle:Ford Fusion Hybrid Platinum (Shadow Black)
  • My Hybrid's Year:2017

Posted 04 February 2017 - 02:59 PM

All other windows (beside the drivers work with 1 touch up/down).  Guess I'll take it to the dealer.



#17 OFFLINE   magchinn

magchinn

    New Member

  • Fusion Hybrid Member
  • 1 posts
  • Region:U.S. Northeast
  • Location:South Jersey
  • Current Vehicle:Ford Fusion SE Hybrid
  • My Hybrid's Year:2017

Posted 06 February 2017 - 08:22 PM

I bought my Fusion on Thursday 2/2 and today 2/6 noticed the driver window was bouncing back to ¾ open after rolling up.  Took it to the dealer and they took the door apart to perform initialization on the motors.  TSB 46349 "Window Bounce Back"  Working fine now.

 

Update: On 2/16 I noticed both front windows were bouncing back after either one touch rolling up or holding the switch rolling up.  Back to the dealer where they followed TSB 46439.  Dealer stated Ford Engineering is aware of this issue and investigating but the motor initialization is the only direction from Ford to resolve this issue.  Stay tuned.


Edited by magchinn, 18 February 2017 - 08:09 PM.

  • Timewellspent likes this

#18 OFFLINE   SteveBoston

SteveBoston

    New Member

  • Fusion Hybrid Member
  • 7 posts
  • Region:U.S. Northeast
  • Location:Massachusetts
  • Current Vehicle:Fusion Energi
  • My Hybrid's Year:2017

Posted 29 April 2017 - 05:57 PM

My son is a Ford tech.  I had a four week old 2017 Energi. 

 

I had the same problem with windows going down as soon as they reached the top.

 

He downloaded new updates to the window control module and recalibrated the windows.  All done with a lap top.  No disassembling or adjustment.

 

All windows work great now.



#19 OFFLINE   stlouisgeorge

stlouisgeorge

    Fusion Hybrid Member

  • Fusion Hybrid Member
  • 137 posts
  • Region:U.S. Mississippi
  • Location:Saint Louis
  • Current Vehicle:Ford Fusion Hybrid Platinum (Shadow Black)
  • My Hybrid's Year:2017

Posted 29 April 2017 - 09:52 PM

.. He downloaded new updates to the window control module and recalibrated the windows.  All done with a lap top.  No disassembling or adjustment.
..

Would love to know the update #. I don't think the mechanics at my dealer would know where to look without a clue. I have tried the 3up/3down three times on three occasions and the 12up/12down three times on two occasions. No joy.

#20 OFFLINE   SteveBoston

SteveBoston

    New Member

  • Fusion Hybrid Member
  • 7 posts
  • Region:U.S. Northeast
  • Location:Massachusetts
  • Current Vehicle:Fusion Energi
  • My Hybrid's Year:2017

Posted 02 May 2017 - 11:19 AM

Here is what he did.  I watched.  Took 10 minutes.

 

"Verified onetouch feature working improperly.  Reprogrammed DDM per SSM 46544.  Performed all window initialization process with IDS.  Retest OK."

 

Good luck!


  • stlouisgeorge likes this




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Privacy Policy Terms of Service ·