Jump to content
mwr

2015 FFH SE 6-Way Power Passenger Seat

Recommended Posts

The 6-Way Power Passenger Seat is supposed to provide these adjustments: fore/aft, up/down, recline. The problem is that the up/down adjustment also moves the seat forward and backward, and not just a small amount. Raising the seat also moves it very much forward.

Why would it do that when it already has a forward and backward adjustment? More than one passenger has complained that the seat was moving forward as they tried to raise it.

Share this post


Link to post
Share on other sites

That is most likely just a result of the mechanical design of the up/down.

Does the seat still move forward/backward the same distance in the different heights or is limited?

Share this post


Link to post
Share on other sites

That is most likely just a result of the mechanical design of the up/down.

Does the seat still move forward/backward the same distance in the different heights or is limited?

I realize that what you said is likely the case. But why in the world would they design it that way?

 

I'm not clear what your question is. The seat moves forward as it moves up, and backward as it moves down.

Share this post


Link to post
Share on other sites

Every car I've had with power seats does this. Your driver's seat should do this as well. This is why I usually keep the drivers seat almost all the way down. It's the design of the mechanism for power seats.

Share this post


Link to post
Share on other sites

Every car I've had with power seats does this. Your driver's seat should do this as well. This is why I usually keep the drivers seat almost all the way down. It's the design of the mechanism for power seats.

My driver's seat does not do this.

Share this post


Link to post
Share on other sites

It's because the height adjuster isn't in the middle of the seat, it's at the back. It's not moving the seat forward on it's tracks, it's just pivoting it forward from the back, so it seems like it's moving forward because it's pushing your legs forward.

 

My wife is quite a bit shorter then I am but we sit in almost the exact same fore/aft driving position because I sit with the seat all the way down and she sits with it all the way up.

Share this post


Link to post
Share on other sites

It's because the height adjuster isn't in the middle of the seat, it's at the back. It's not moving the seat forward on it's tracks, it's just pivoting it forward from the back, so it seems like it's moving forward because it's pushing your legs forward.

 

My wife is quite a bit shorter then I am but we sit in almost the exact same fore/aft driving position because I sit with the seat all the way down and she sits with it all the way up.

All I know is the passenger seat moves forward a lot when you raise it. I don't think it should have been designed that way. The driver's seat doesn't do that.

Share this post


Link to post
Share on other sites

All I know is the passenger seat moves forward a lot when you raise it. I don't think it should have been designed that way. The driver's seat doesn't do that.

 

My driver's seat does.

Share this post


Link to post
Share on other sites

My driver's seat does not do this.

do you have the 10-way power driver's seat?

My driver's seat does.

do you have the 6-way power driver's seat?

Share this post


Link to post
Share on other sites

do you have the 10-way power driver's seat? do you have the 6-way power driver's seat?

10-way driver's seat.

Share this post


Link to post
Share on other sites

10-way driver's seat.

Since one of your seats is 6-way and the other is 10-way, the mechanism is different which is why the driver's seat doesn't move forward and up like the passenger seat does.

Share this post


Link to post
Share on other sites

Since one of your seats is 6-way and the other is 10-way, the mechanism is different which is why the driver's seat doesn't move forward and up like the passenger seat does.

I'm fully aware of that. My problem is wondering by Ford would design the 6-way seat that way; in my opinion it's a very poor design. "Up and down" should mean "up and down", especially when you also have a "forward and backward" separate adjustment.

Edited by mwr

Share this post


Link to post
Share on other sites

Because the structure of the 10 way and 6 way seats are the same, the 6 way is just missing the front motor. Therefore the up and down on the 6 way is only moving the back of the seat up and down.

Share this post


Link to post
Share on other sites

Because the structure of the 10 way and 6 way seats are the same, the 6 way is just missing the front motor. Therefore the up and down on the 6 way is only moving the back of the seat up and down.

That's definitely not the way the 6-way passenger seat works. The whole seat moves up and down, not just the back of the seat. The problem (to me) is that the seat also moves forward as it moves upward.

Share this post


Link to post
Share on other sites

Try to design a seat that uses a motor only on the rear that will go straight up smoothly. It's all about geometry,

Edited by Waldo

Share this post


Link to post
Share on other sites

Try to design a seat that uses a motor only on the rear that will go straight up smoothly. It's all about geometry,

Who said they need to use a motor only on the rear of the seat? If that method is a poor design, they should do it another way.

Share this post


Link to post
Share on other sites

Who said they need to use a motor only on the rear of the seat? If that method is a poor design, they should do it another way.

 

I did, because they need to use the same seat frames for everything, including the 10-way. Many, many things on your car are compromised because of features you don't have but others do. Like why do we have a spare tire tub when we don't have a spare tire?

Share this post


Link to post
Share on other sites

To belatedly address Waldo's question, I've given up trying to figure WHY Ford does many things, but I'm personally very grateful that they left the spare wheel tub in the spare-less Fusion hybrids so that I had a place to put the spare that I now carry.

Share this post


Link to post
Share on other sites

I'm personally very grateful that they left the spare wheel tub in the spare-less Fusion hybrids so that I had a place to put the spare that I now carry.

Same here.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...